Pet Detection not Working
I have a wall mounted C420S1 camera mounted less than 10ft as recommended from the ground with Person, Motion and Pet detection enabled. However, all notifications I'm getting are for either person or motion detection, but nothing for pet detection. So even though my pets cross within the camera view regularly, nothing is triggered. I've increased the sensitivity for pet detections and allowed activity and rich notifications for all three detection types. Is this a known issue or is there something you can recommend to fix?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Declan_Kilker @Solla-topee Hi!
Unfortunately, I have the same issue with a C410.
Settings are correct, and so is the placement/installation. It only detects my pet in about 5% of cases.
I've also tried contacting the support, the agent promised a follow up but I never heard back.
Pet detection is the main reason I chose this product....
Thanks,
Lall
- Copy Link
- Report Inappropriate Content
Hi,
1. I have informed the tech team to handle your case as soon as possible, please wait patiently.
2. On the Tapo camera's Device Settings>Detection>Wake-up Sensitivity page, you can tap the Detection Range Test to check your camera's activity detection zone, and you can check if your pet moves within the zone.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee Hi,
I have done the test and indeed my pet moves within the zone. I kind of knew that already, as very, very infrequently gets detected there.
- Copy Link
- Report Inappropriate Content
Hi,
You can increase the Wake-up Sensitivity value and check if it helps.
Our tech team has contacted you via email, and it's suggested to reply to it for further assistance.
Best Regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
Thank you for your cooperation, and please feel free to reply to the tech team via email if there are any updates.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee I have 3 C520WS, pet detection was working before and after firmware upgrade it is not all not working.
Can you help us. The current firmware version is Version 1.2.8 Build 240606 Rel. 39146n.
Thank you.
Mojo
- Copy Link
- Report Inappropriate Content
Hi，
1. Please describe the problem phenomenon in detail, such as the camera can't detect pets, the camera detects a pet as a person, etc.
2. On the camera's Device Settings > Detection page, send me a picture of this page and a picture of the Pet Detection page.
3. Can you share a video showing the reported issue?
Best Regards
- Copy Link
- Report Inappropriate Content
1. the camera can detect person and person in moton but not pet.
2. please see the setting attached and the pet in the picture that was not detected.
3. no video for pet detection.
Pet in the background not detected
- Copy Link
- Report Inappropriate Content
Hi,
Thank you for the information provided. I have escalated your case to the tech team, and they will follow up on this case via email. Please wait patiently.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 2362
Replies: 30
Voters 0
No one has voted for it yet.