Tapo Hub doesn't play ringtone when selected in app
Tapo Hub doesn't play ringtone when selected in app
When I'm in the Tapo app the hub doesn't play anything when I press the Play Ringtone button. It shows up as an event in the log. Any idea what's wrong
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Try to adjust the ringtone volume to High. And switch different ringtones for testing.
If there is still no sound, try to factory reset this device and reconfigure it.
How to factory reset Tapo Hub H100? Press and hold the SYNC for 10 seconds to restore your hub to factory default settings. The LED blinking orange indicates a successful factory reset. And you can reconfigure the hub in the Tapo app.
- Copy Link
- Report Inappropriate Content
Try to adjust the ringtone volume to High. And switch different ringtones for testing.
If there is still no sound, try to factory reset this device and reconfigure it.
How to factory reset Tapo Hub H100? Press and hold the SYNC for 10 seconds to restore your hub to factory default settings. The LED blinking orange indicates a successful factory reset. And you can reconfigure the hub in the Tapo app.
- Copy Link
- Report Inappropriate Content
@Wayne-TP did a factory reset. Didn't make any difference. Still no sound.
- Copy Link
- Report Inappropriate Content
This sounds like a hardware issue with its speaker. Please contact the retailer or local TP-Link support to proceed with the warranty.
- Copy Link
- Report Inappropriate Content
@Wayne-TP thanks. I'll do that.
- Copy Link
- Report Inappropriate Content
@dmackenzie Hello did you resolved the issue? Ihave exact same problem.
- Copy Link
- Report Inappropriate Content
@Welna84 I sent it back to Amazon for a replacement. The new one worked fine.
- Copy Link
- Report Inappropriate Content
@dmackenzie Possible issues could include software glitches, compatibility problems, or settings misconfigurations. Ensure your Tapo Hub's firmware is updated, check app settings for ringtone preferences, and contact Tapo support for specific troubleshooting tailored to your device and version.
- Copy Link
- Report Inappropriate Content
@dmackenzie You can Check the network connection and volume settings on your device. If the problem persists, contact Tapo technical support.
- Copy Link
- Report Inappropriate Content
I had this issue with my hub... the smart action just wouldn't work.
Turned out that anything made using the "Build a smart" action just didn't work, but when I just made one from scratch (go the the main Tapo screen, and tap the box that says Smart) it works fine. I hope this helps someone.
- Copy Link
- Report Inappropriate Content
ark4peace wrote
I had this issue with my hub... the smart action just wouldn't work.
Turned out that anything made using the "Build a smart" action just didn't work, but when I just made one from scratch (go the the main Tapo screen, and tap the box that says Smart) it works fine. I hope this helps someone.
Automations added from the product page's "Explore Smart Action" are identical to those added through the "smart" tab.
The former serves as a convenient access point, offering some common automations related to the product. Automations created via this access point can be found and further customized in the smart tab.
In your case, you might want to check if you've added any duplicate automation rules through this entry or double-check if the related settings are correctly configured.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2268
Replies: 15
Voters 0
No one has voted for it yet.