Kasa Smart Thermostat
Temperature set on the valves are to 19c but when the heating turns on, all of the radiators in the house turn on... including the KE100 ones even if the temperature is over 19c. Causing the rooms to
Temperature Calibration
By
emberone
0Helpful
24Views
=====EDIT====== Here is the summary of various issues that KE100 has with maintaining correct temperature: ### Constant cycling between open/closed state, no gradual adjustment/compensation Instead of
Temperature Calibration
5Helpful
220Views
Hi, I have a large number of Tapo/Kasa products already. I now want to equip all of the radiators in my large house (20) with smart TRVs. As a test I have purchased enough for one large room that has
Smart Control/ScheduleTemperature CalibrationAutomation Tricks
0Helpful
611Views
I've got x2 KE100 trv and x2 T310, split into two groups and connected with designated sensor. The temperature readout in the app on one group matches almost perfectly, nearly all of the time (+/- 0.1
Temperature CalibrationDevice ConnectivityKasa App Related
0Helpful
201Views
Hi, I received KE100 and I went ahead to install it. I did install it but it seems that it doesn't properly close the radiator. It seems like it closes it halfway. Even after the device is turned off,
InstallationTemperature Calibration
0Helpful
86Views
Hi! My question is why I can't connect the Kasa smart thermostat to the tapo app. Because I can't connect tapo sensors this way either! Why is this, please answer! This is important to me!
Temperature CalibrationSmart Action
8Helpful
812Views
Hi, I am trying now for several months with my KE100 and sometimes it simply runs into a weird bug, it claims to be off but the heater is fully heating and also in reporting it seems to be "on" per le
Temperature Calibration
2Helpful
722Views
Does anyone else notice these radiator valves are a bit useless with the Tapo Smart Temperature & Humidity Monitor? I have readings up to 2 or 3 degrees hotter than the actual room temps, they turn of
Temperature Calibration
0Helpful
537Views
Hello Folks, I installed 4 KE100 thermostats yesterday and connected them to the Smart Hub, all seem to be working ok except 1, for some reaon it is reporting a temperature of 29 degrees and will not
Temperature Calibration
By
mikejhathaway
· Latest post 2024-01-17 11:23:14
by mikejhathaway
6Helpful
648Views
I've realized a strange behavior on KE100. I saw that the heating symbol was shown on the thermostat and in the Kasa app's report page as well. But there is no hot water flowing inside the radiator. S
Temperature Calibration
0Helpful
823Views