Have you checked the default IP address of the CPE710 in the manual? Setting your MacBook's IP in the same range should help you log in. Also, ensure the master bridge is in AP mode and the other in Client mode  rpay balance inquiry for proper communication.

It is like you're close! On your MacBook, go to System Preferences > Network, select Ethernet (or USB Ethernet if using an adapter), click Advanced, then TCP/IP. Set it to Manually and assign an IP like 192.168.0.2 with subnet 255.255.255.0. Then access the bridge via its default IP to configure it. Hope your new adapter gets you up and running tiro al palo tenis.

It is like you're almost there! On your MacBook, once you have the Ethernet adapter, go to System Preferences > Network, select the Ethernet connection, and manually set an IP in the same range as your bridge (e.g., 192.168.x.x). That should let you access the bridge's web interface to configure  wrap of the day Saturday it. Double-check the master/slave roles for the bridges too—sometimes that's an easy oversight.

  @ab23401 

To set up your wireless bridge on your MacBook, connect the master bridge via Ethernet, set a static IP in System Preferences > Network, and enter an IP like 192.168.1.2. Access the bridge settings in a browser and set it to AP mode, assigning it a static IP (e.g., 192.168.1.10). Do the same for the second bridge, setting it to Client Mode and pairing it with the master bridge. Finally, revert your MacBook’s Ethernet settings to DHCP and test the connection.

Just like setting up your network, Well Expert Cleaning provides reliable ensuring your space is always spotless. Contact us today! bit.ly/4fJrftc

  @ab23401 Have you checked the default IP address of the CPE710 in the manual? Setting your MacBook's IP address within upbank the same range should allow you to log in. Also, make sure the master bridge is set to AP mode and the other to Client mode for proper communication.