S200 automation with S220
I have problem with running automation from an S200B button controlling S220 2 gang switch
I have connected the S220 on some lights and this works well in manual mode
However I wanted an automation to press the button and operate the s220 switch and a p100 power . The p100 works ok but the s220 doesn't . Any suggestions?
Time automation works ok..
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Check whether the S220 and the Tapo hub can be controlled remotely (e.g. using cellular data) with Tapo App.
- If the switch cannot be control remotely but the hub can, try to reboot both switch and the hub.
- If neither switch nor hub can be remotely managed, try to reboot the Tapo hub and your router. More suggestions on Cannot use the Tapo/Kasa app to control my smart devices
Related Articles
What To Do If Tapo Smart Action (Automation/Shortcut) Doesn't Take Effect
- Copy Link
- Report Inappropriate Content
Check whether the S220 and the Tapo hub can be controlled remotely (e.g. using cellular data) with Tapo App.
- If the switch cannot be control remotely but the hub can, try to reboot both switch and the hub.
- If neither switch nor hub can be remotely managed, try to reboot the Tapo hub and your router. More suggestions on Cannot use the Tapo/Kasa app to control my smart devices
Related Articles
What To Do If Tapo Smart Action (Automation/Shortcut) Doesn't Take Effect
- Copy Link
- Report Inappropriate Content
Both the S220 and the H100 work manual from the app ok
It is the automation that doesn't
Strangely I manage to get the same automation working ok from Alexa Routines but not from the Tapo app.
- Copy Link
- Report Inappropriate Content
Any error reported on the automation History (Tapo App -> Smart tab -> Upper right corner, History) ?
Can you share a screenshot of your automation settings here?
- Copy Link
- Report Inappropriate Content
This looks similar to my automation issue where automation doesnt fire the switch action, but manual or alexa does!
https://community.tp-link.com/en/smart-home/forum/topic/697226
- Copy Link
- Report Inappropriate Content
@Jacob21 I would try it again this today... There has been a series of firmware updates that seems to have fixed this bug!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 495
Replies: 5
Voters 0
No one has voted for it yet.