Home

Forums

Stories

Knowledge Base

TP-Link Community > Tapo Robot Vacuum > Setting water usage when the mop tray is not attached?

< Tapo Robot Vacuum

Setting water usage when the mop tray is not attached?

Setting water usage when the mop tray is not attached?

Setting water usage when the mop tray is not attached?

2024-07-25 00:55:32

Posts: 12

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-06-24

Setting water usage when the mop tray is not attached?

2024-07-25 00:55:32

Model: Tapo RV20 Mop

Hardware Version: V1

Firmware Version: 1.1.3

I am in the process of creating custom presets. I can set values for Cleaning Times, Vacuum Power, and Water Level.

My question is about Water Level... If I do not have the mop tray attached/snapped in, is this Water Level value ignored? Or, is the water pump trying to pump water when the mop tray isn't even attached?

I wonder if I should be creating presets with Water Level:None so that I am not needlessly working the water pump.

0

0

#1

1 Reply

2024-07-26 09:03:06

Posts: 3487

Helpful: 657

Solutions: 953

Stories: 12

Registered: 2020-06-23

Re:Setting water usage when the mop tray is not attached?

2024-07-26 09:03:06

The mopping mode will be disabled when the mop cloth mount is removed. In this state, when you first enter the Robot Vacuum's page, you will receive a prompt informing you that the mop is not installed and the mopping mode has been exited. In this state, the robot vacuum will only perform vacuuming, and the water level will be set to 0.

When the mop is reinstalled, the mopping mode will be reactivated, and the water level will be restored to the preset level.

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.

0

0

#2