Tapo C310 & Smart Hub H100

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tapo C310 & Smart Hub H100

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tapo C310 & Smart Hub H100
Tapo C310 & Smart Hub H100
2024-03-27 09:38:14 - last edited 2024-04-14 09:07:21
Model: Tapo C310  
Hardware Version:
Firmware Version:

Hello,

 

1. Will Tapo C310 work with Smart Hub H100 for alarm ? 

 

2. Is there a way to connect to camera remotely (using App) to monitor (without using Cloud subscription) ?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Tapo C310 & Smart Hub H100-Solution
2024-03-28 03:58:24 - last edited 2024-04-14 09:07:21

  @Kurt1234 

Hi,
1. You can refer to the link below to set up the Smart Action feature to make the Tapo C310 work with Hub H100 for alarm.
How to create Smart Action (automation or a shortcut) of my Tapo devices?
Trigger: when the camera detects motion, person, area intrusion, etc.
Action: Ring H100

 

2. It's unable to manage the camera remotely using the Tapo app without a cloud service. However, the Tapo C310 supports RTSP/ONVIF and you can watch the camera remotely via RTSP/ONVIF.
How to view Tapo camera on PC/NAS/NVR through RTSP/Onvif Protocol?
 

Note: If you want to view the live stream of the Tapo camera with a third-party app remotely, you will need to open port 554 for the camera on your host router first. Please enable the TCP forwarding for port 554.

 

Best Regards

 

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Tapo C310 & Smart Hub H100-Solution
2024-03-28 03:58:24 - last edited 2024-04-14 09:07:21

  @Kurt1234 

Hi,
1. You can refer to the link below to set up the Smart Action feature to make the Tapo C310 work with Hub H100 for alarm.
How to create Smart Action (automation or a shortcut) of my Tapo devices?
Trigger: when the camera detects motion, person, area intrusion, etc.
Action: Ring H100

 

2. It's unable to manage the camera remotely using the Tapo app without a cloud service. However, the Tapo C310 supports RTSP/ONVIF and you can watch the camera remotely via RTSP/ONVIF.
How to view Tapo camera on PC/NAS/NVR through RTSP/Onvif Protocol?
 

Note: If you want to view the live stream of the Tapo camera with a third-party app remotely, you will need to open port 554 for the camera on your host router first. Please enable the TCP forwarding for port 554.

 

Best Regards

 

Recommended Solution
  0  
  0  
#2
Options