@keithh Yes I find that if you actually USE the relay in P100 or P110s they fail with horrible regularity.

The 10 or so I use have about a 10-15% fail rate per year. The ones that are always turned on and never change, just monitoring, never fail.

keithh wrote

I have purchased 10 P110 Plugs with Energy Management over the last 6 months and so far I have had 4 go faulty. Three have been returned to TP-Link and replacements sent (in one case the original was returned ..I guess with some sort of reset) . The problems are with the internal relays , switching on and off repeatedly. This is likely to cause damage to any sensitive equipment attached and in my case cause food in my freezer to be wasted. I get asked stupid questions about load on the plugs when I report faults . There's not much point putting energy management on a device that draws a few milliamps . After all they are rated 13 amp 240 volts therefore Watts=VoltsxAmps=13*240=3kW ... None of my devices are rated over 2Kw.

I've used KASA plugs (with and without Energy Management) for years , and never had an issue with them. They have NEVER failed ... but these TAPO P110 fail all the time with dissasterous consequences .

What are other peoples experiences with TAPO P110 ?