TL-SX3206HPP 1.0 where to set the gateway IP to the MAIN L3 switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-SX3206HPP 1.0 where to set the gateway IP to the MAIN L3 switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SX3206HPP 1.0 where to set the gateway IP to the MAIN L3 switch
TL-SX3206HPP 1.0 where to set the gateway IP to the MAIN L3 switch
2023-11-06 13:07:09 - last edited 2023-11-13 14:55:28
Model: TL-SX3206HPP  
Hardware Version: V1
Firmware Version: 1.04

Hello all,

 

Question about the new switch

 

We use a Hirschmann L3 swictch to set all the networks and VLAN.

 

Now for a small part we need 10GB connectivity.

So we have setup 2  TL-SX3206HPP   connected with 10GBSFP+ between the building.

To manage them we use a special managemt VLAN  (102) from where all the switches and routers are managed.

 

1 port form 1 TL-SX3206HPP  is connected to the "main switch".

 

When my laptop is in the iprange and connected to the managemnt VLAN is can connect.  But in the office not.
The reason for this is that i can not set the gateway IP in the TL-SX3206HPP    The gateway IP 10.11.102.11  can not be set
We managed to set the Switch IP to VLan 102     But where is the gateway entry ?????

 

 

Where is the gateway option ??

  0      
  0      
#1
Options
1 Accepted Solution
Re:TL-SX3206HPP 1.0 where to set the gateway IP to the MAIN L3 switch-Solution
2023-11-08 09:46:37 - last edited 2023-11-13 14:55:28

  @10GBswitch To add default gateway, just add an static route with destination 0.0.0.0/0 and with your gateway ip. This will be the default route

Recommended Solution
  2  
  2  
#4
Options
4 Reply
Re:TL-SX3206HPP 1.0 where to set the gateway IP to the MAIN L3 switch
2023-11-07 02:19:32

Hi @10GBswitch 

Thanks for posting in our business forum.

Not sure about your need. Information is scattered. Where is this "office" coming from?? I am in total confusion.

 

To your question:

They are under the same subnet. There is no need to set up the gateway IP.

The reason why you can access this subnet is because you put the correct subnet. If you put an incorrect subnet, you will fail the access.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:TL-SX3206HPP 1.0 where to set the gateway IP to the MAIN L3 switch
2023-11-07 19:07:03 - last edited 2023-11-07 19:07:44

  @10GBswitch 

Thx for the replay

 

We have a central Layer 3 who does the routing from all v-lan

 

So we can acces all switches from lets say the office network.

The gateway for our managment lan is 10.11.101.11

 

All other switches have something like this below, thisswitch is reachable from the office network in anaorher vlan

 

  0  
  0  
#3
Options
Re:TL-SX3206HPP 1.0 where to set the gateway IP to the MAIN L3 switch-Solution
2023-11-08 09:46:37 - last edited 2023-11-13 14:55:28

  @10GBswitch To add default gateway, just add an static route with destination 0.0.0.0/0 and with your gateway ip. This will be the default route

Recommended Solution
  2  
  2  
#4
Options
Re:TL-SX3206HPP 1.0 where to set the gateway IP to the MAIN L3 switch
2023-11-13 14:55:20

  @OXAR 

 

yes   This works Perfect.

 

Peter

  0  
  0  
#5
Options