TP-Link Community > Tapo Smart Camera > C225 firmware downgrade / notification issues
< Tapo Smart Camera

C225 firmware downgrade / notification issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

C225 firmware downgrade / notification issues

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
C225 firmware downgrade / notification issues
C225 firmware downgrade / notification issues
2023-07-14 00:00:27 - last edited 2023-08-01 00:17:58
Tags: #Firmware #Notifications
Model: Tapo C225  
Hardware Version: V1
Firmware Version: 1.0.20

Hi,

Simple question : is it possible to downgrade firmware to previous version ?

Current 1.0.20 is unusable. Bugged notifications, bugged timeline playback, even line crossing doesn't work properly and triggers with events outside of boundaries.

Previous version worked way better. I rather have working camera than ability to record in 25fps.

 

Thanks

Red

 

Ps. Tickets [TKID230711202]. [TKID230722649]  [TKID230722654]

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:C225 firmware downgrade-Solution
2023-08-01 12:44:15 - last edited 2023-08-01 12:44:20
@MickyAndRed Thank you very much for the updates.

Hi everyone, 
It's recommended to refer to the suggestions in this thread "Tapo C225 V1 can't receive detection notifications after updating the firmware to the 1.0.20 version" to solve the can't receive notification issue if you encounter the same one.

Best Regards
>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
Recommended Solution
  1  
  1  
#10
Options
9 Reply
Re:C225 firmware downgrade
2023-07-14 10:21:03

  @MickyAndRed 

Hi,
We have no method to downgrade the firmware of the Tapo C225. In your case, it's suggested to troubleshoot on the latest firmware, and since you have contacted the tech team, I'll inform them to reply to you soon.

Best Regards
 

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#2
Options
Re:C225 firmware downgrade
2023-07-14 12:47:39

Thank you for your replay.

I just got a message with specific instructions from a technician and will be preparing full report as soon as I can.

I will post the end findings for others to see in case this isn't general problem with the firmware and happens only to select few ( or just me ).

 

Red

  2  
  2  
#3
Options
Re:C225 firmware downgrade
2023-07-23 09:32:24 - last edited 2023-07-23 09:36:23

@Solla-topee   @MickyAndRed hello, just to let you know that I have the same camera (C225) and same new firmware version, and it's completely bugged.

Notifications don't work at all anymore.

In essence the newest firmware made the camera useless...

  0  
  0  
#4
Options
Re:C225 firmware downgrade
2023-07-24 09:45:47

  @jgb1984 Absolutely. The only reason I choose this model was for it's AI and ability to select what type of notifications I get - very helpful in my case. Without that it's useless like you said. 

I am in contact with support. We will see if they can pinpoint the problem.

  0  
  0  
#5
Options
Re:C225 firmware downgrade
2023-07-25 06:00:33

  @jgb1984 

Hi, 
About the notification issue, please help confirm the following information for further analysis.
1. On the Camera Settings page of the Tapo C225, go to the Detection & Alerts>Activity Notifications page, send me a picture of this page, and then click on Activity Type and send me a picture of this page.


2. What detection have you enabled? Such as Motion, Person, Vehicle, etc.


3. If your configuration is correct but can't receive notifications, please refer to the link below to troubleshoot.
Why can’t I receive notifications after turning on Notifications?

4. On the Tapo app>Home>tap the Message icon at the top right corner, can you see any notifications for your C225?


5. Is the camera connected to an NVR? If yes, disconnect it from NVR for a try.

 

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#6
Options
Re:C225 firmware downgrade
2023-07-25 07:57:19 - last edited 2023-07-25 08:08:57

  @Solla-topee 

 

Hello,

 

my settings are the correct ones, it always worked fine before the latest firmware upgrade.

I've tried to experiment with different combinations of settings, but there's no way to bring back the notifications.

Also on the Android OS level everything is set up fine, all notifications are allowed and I do not use do not disturb mode.

The notifications are also not present inside the Tapo app itself.

 

I also own a Tapo C200 camera for which the notifications work fine.

 

1) see screenshots below

2) see screenshots below (I tried different combinations of detection, nothing helps)

3) followed the link, didn't help

4) There are no notifications for C225 in the tapo app

5) not connected to an NVR, but I do have RTSP enabled ("device account"). I don't know how I can disable this? All I can do is change the username of the account, but I cannot seem to disable the functionality.

 

 

 

 

 

settings 1

settings 2

 

settings 3

  0  
  0  
#7
Options
Re:C225 firmware downgrade
2023-07-27 04:03:29

  @jgb1984 

Hi,
The tech team was made aware of your issue, and they will likely reach out to you via email to continue the troubleshooting. Please check your email box and confirm.
Best Regards
 

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#8
Options
Re:C225 firmware downgrade
2023-08-01 00:17:53 - last edited 2023-08-01 13:36:37

  Thank you @Solla-topee for your help in speeding up the whole process. 

Looks like devs/engineers were able to identify the issue and deploy fix - my device have received beta version and it seems everything is working as intended. I tested the fix from every possible angle. 

I'll give it 24hr before sending confirmation but so far so good.

 

Thanks again

Red

 

  1  
  1  
#9
Options
Re:C225 firmware downgrade-Solution
2023-08-01 12:44:15 - last edited 2023-08-01 12:44:20
@MickyAndRed Thank you very much for the updates.

Hi everyone, 
It's recommended to refer to the suggestions in this thread "Tapo C225 V1 can't receive detection notifications after updating the firmware to the 1.0.20 version" to solve the can't receive notification issue if you encounter the same one.

Best Regards
>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
Recommended Solution
  1  
  1  
#10
Options

Information

Helpful: 1

Views: 1650

Replies: 9

Tags

Firmware
Notifications
Related Articles
 C225 EU/2.0 firmware downgrade request
53 0
C225 need new firmware
316 0
2 x C225 with Different firmware?
1065 0
C225 Firmware update
289 0
C225
223 0
Tapo C225 - motion notifications have stopped.
1591 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.