I have created a firewall rule to allow Ping responses to requests that originate from specific addresses but it does not work and the documentation is incomplete so would appreciate some guidance on

Hi, I am having the following setup: 1x TL-R605 router 2x TL-SG2008P sswitches 1x TL-OC200 1x TL-EAP620HD I am running a Pi (192.168.10.2) with Pi-Hole and Unbound for handling local DNS traffic. Also

The EAP265HD is in standalone mode without a controller. I can access its web portal locally. I set port forward in the router but EAP265HD does not respond when I access from outside. I tried turning

The ER605 has LAN IP address of 192.168.0.1 and my test is turn on ER605's SSH server and port forward to 192.168.0.1:22. It works if source IP is set to 'Any' (0.0.0.0/0). If I set it to limit IP add

I'm trying to open ports on this router. I've entered the info into the transmission/nat/virtual server page. If I test it from GRC.com shields-up, all of the ports are showing up as stealth and not o

I enabled SNMP. For testing, I set trusted host to be 0.0.0.0. When I use snmpwalk, I can get response when I access the LAN port, but not through the WAN port. I tried opening port 161 in the firewal