@TNT21 Hi, A few points here. 1) The TL-WPA4220 only supports 2.4 GHz Wi-Fi. Therefore you don't need to worry about 5G. 2) When performing the procedure of pairing Powerline adapters it is...

@VikramSolanki Hi, The first thing to try would be to configure your Wi-Fi router to use channel 36 in 5 GHz band, because this channel is (apart from one or two countries) most commonly supported by...

IPV6 incoming Firewall Rules - where are they @CT99 Hi, Normally they should be where they can be seen in the Emulator for the BE230 https://emulator.tp-link.com/be230v1/index.html#/ipv6 (scroll down...

@Zeemalik The "IP Address" being different every time you connect is quite normal. No need to worry about it. The "Status" information on the screenshot you posted looks fine to me. I have no idea...

@Iavorcho Hi, Your observations regarding the Archer AX53 V1 are correct. At present, only the Public Beta Firmware 1.2.4 Build 20240206 supports EasyMesh via Ethernet backhaul. The thing is that...

@1DaveC Hi, You didn't mention the model number of your "AV600" adapter, so below I've pasted the applicable section of the manual for a TL-WPA4220 as an example.