@CoffeeAndTech For those viewing this thread in the future and experiencing this same issue, I was able to solve it by setting Band Steering = Disable (by default it is set to "Prefer 5Ghz/6Ghz”) and...

@Arne17 I did. using Fast.com and Speediest, my WiFi is a little slower. Didn't help with clients dropping. ive been waiting to write this up to make sure I throughly tested this but I seemed to have...

@Vincent-TP Let me be clear: I have two SSIDs. These are separate VLans. - Primary (192.168.1.1/24) - IoT (192.168.2.1/24) If I set PMF = Capable on my Primary SSID and PMF = Disable on my IoT SSID,...

@Vincent-TP My EAPs have been up for almost 2 days now without dropping connections on my IoT devices. They have never gone this long. This probelm had nothing to do with Multicast-To-Unicast...

@Vincent-TP Are they using the latest firmware version? Yes, the IoT devices are using the latest firmware. When they disconnected, what's the APP showing? The TP-Link Kasa app shows the devices as...

@Vincent-TP It is happening on the following devices: EP40, HS200, HS210. Along with disabling multicast-to-unicast conversion, I have also disabled PMF to determine if that solves the issue.