Hi @ghost124 Here are some troubleshooting steps and potential solutions: 1. Check DHCP Lease Pool Size - Your DHCP range (`192.168.10.5` to `192.168.10.220`) should support up to 216 IPs, which is...

Hi @vellasta Based on your description, the issue is most likely related to the Ethernet cable connected to the EAP225-Outdoor. To isolate the problem: Test the cable: Unplug the cable from the...

Hi @SyNet The EAP110-Outdoor only has one usable Ethernet port, and that's normally work as an POE port, making it impossible to daisy-chain (as intermediate units require at least **2 free ETH...

@Karton Great to hear that the issue has been resolved! If you encounter any further problems or have additional questions, feel free to reach out. We're here to help! 😊

Here is the sulotion: This issue only happens if have Past Connections on, anything else it works fine.

Hi @Karton This error message is incorrect. It should be **[unitprice]**, not **[duration]**. We will fix this issue promptly. Thank you for bringing this to our attention. To resolve your problem,...