ER707-M2 + OC200 - Settings Backup Dropping Wireless Points!
So I've had a weird thing for a while now, on my iPhone I'd daily wake up to the Omada App saying my WIFI points (have three) disconnected/reconnected at around 3:30-4am.
I thought hey maybe I have a schedule to reboot or something......... anyway I finally decided to take a look and the only thing I have scheduled at that time is a full settings backup to the USB plugged into the OC200.
So this is for the TPLink Tech's....... I moved my backup an hour just to see and sure enough the notification on the iPhone moved an hour. I am not awake at this time to see if it's actually dropping the WIFI but I presume it is.
So thats something you guys need to look at in your firmwares. @Clive_A
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Here is the sulotion:
This issue only happens if have Past Connections on, anything else it works fine.
- Copy Link
- Report Inappropriate Content
strange, I had the same thing with unifi controller a few years ago, when I took backup disconnected all the devices on the controller, the controller worked so hard with the backup that it couldn't keep the devices that were on it.
this also applied when I took backup manually. see if it's the same on OC200 it's also very weak so I suspect that's what the problem is.
- Copy Link
- Report Inappropriate Content
Hi @MrHC1983
What's the firmware version of the OC200?
Apart from the mentioned three access points, is there any other SDN devices managed by the OC200?
If yes, were they affected?
In the meantime, I had create a support ticket for further investigation, please have a check , the case ID is TKID250353615.
- Copy Link
- Report Inappropriate Content
I don't have any issues with either scheduled or manual backups disconnecting devices, and My oc200 is managing a pretty large network with several remote sites too.
Mine is powered by poe, not sure if that makes the difference?
- Copy Link
- Report Inappropriate Content
@MrHC1983 So coming back with the answer. TPLink no doubt are making adjustments on the firmware for this but in my case it was Past Connections that was causing this.
I could still do the full 365 days backups but just had to untick Past Connections which is kinda what the whole 365 days was about........ but meh. I'll try it again once I get my hands on a OC220 whenever they decide to release that.
- Copy Link
- Report Inappropriate Content
Here is the sulotion:
This issue only happens if have Past Connections on, anything else it works fine.
- Copy Link
- Report Inappropriate Content
@MrHC1983 Evidently I have now setup a VM in Hyper-V with DietPi and Omada (non docker). I just couldn't stand how slow the OC200 is........ the OC220 is STILL NOT OUT.
There's so many things Omada is missing like LIVE TRAFFIC....... Seeing who's using what over the internet LIVE on the mobile app and in the web browser......... and so much more.
I used Omada Daily and I use Unifi daily........ MAN...... Omada you need to take BIGGER STEPS.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 180
Replies: 6
Voters 0
No one has voted for it yet.