@szewciulek If you use device isolation, the isolated devices can communicate with each other. The devices that are not isolated can also communicate with other devices that are not isolated. It does...

@Plaza246 The IP address 192.168.100.1 is a private IP address that is reserved for internal networks only and is outside the subnet range of both your AX72's WAN and LAN networks. You probably need...

@Anthony_G Your layout looks good to me but your coverage will depend on many factors, such as the type and thickness of the walls. It's probably just a question of trying everything and see how well...

@Marvin_S Thank-you for your response. Allow me to answer your questions: 1. The MR500 is connected directly to the main router using a LAN port of the MR500. If I use the WAN/LAN port of the MR500,...

@Anthony_G I used to have a similar setup using AX55 routers. Most (if not all) Tp-Link routers can be used in Wireless Router mode or in Access Point mode. As you already have your router in AP...

@Marvin_S Thanks for responding. After a day, the speed has not dropped. It would appear that there is a problem with the WAN/LAN port speed negotiation which the engineers should look at. The MR500...