@Virgo No ACL's on the switches that I can see... Out of desperation, I purchased a UI ER-X load balancing router. After some initial issues getting things configured correctly I am able to ping and...

@Tex_2022 Confirmed Firmware Version: 1.2.2 Build 20230208 Rel.74570 And DHCP is passing the subnet mask 255.255.255.0

@Tex_2022 Furthering the investigation, searched for a rogue DHCP server but did not find one: Started with the routers DHCP server on to confirm, then switched it off and rejoined my WiFi network....

@Virgo Thank for the reply and the interest. The ER605 has 3 WAN ports; WAN & WAN/LAN1 load balanced, WAN/LAN2 as a Link Backup. Port 5 goes to my UI USW-Lite-16-PoE switch (Port 9). The following is...

I am experiencing some routing issues with my ER605. Specifically, it's two HP printers that I cannot ping, though they are on the network with reserved IP addresses. Toying around with netstat, I...

Looking for guidance concerning Load Balancing with 2 T-Mobile Inseego FX2000-3 modems. I have both modems configured for I/P pass-through. Connecting to the modems directly I can achieve a d/l rate...