DHCP & DNS Issues
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I am experiencing some routing issues with my ER605. Specifically, it's two HP printers that I cannot ping, though they are on the network with reserved IP addresses. Toying around with netstat, I discovered the following:
| => netstat -rn
Routing tables
Internet:
Destination Gateway Flags Netif Expire
default 192.168.0.1 UGScg en0
127 127.0.0.1 UCS lo0
127.0.0.1 127.0.0.1 UH lo0
169.254 link#15 UCS en0 !
192.168.0 link#15 UCS en0 !
192.168.0.1/32 link#15 UCS en0 !
192.168.0.1 34:60:f9:ee:6b:81 UHLWIir en0 1179
192.168.0.31 link#15 UHRLWIi en0 !
192.168.0.105 34:3:de:27:89:73 UHLWI en0 1134
192.168.0.108 30:45:11:3f:db:41 UHLWI en0 1195
192.168.0.109 90:70:65:4:f7:44 UHLWI en0 1160
192.168.0.110 1e:af:46:66:39:a7 UHLWI en0 1182
192.168.0.112 ca:5c:49:5d:5e:d5 UHLWI en0 831
192.168.0.114 0:7:a6:26:b1:12 UHLWI en0 1164
192.168.0.116 22:c0:9d:37:1:75 UHLWI en0 223
192.168.0.122 92:f9:8f:bd:b9:6a UHLWI en0 322
192.168.0.126/32 link#15 UCS en0 !
192.168.0.132 ac:d5:64:bb:2c:13 UHLWI en0 1166
The address in question is 192.168.0.31, showing link#15, whereas the rest of the devices show their machine ID. There is also an UI Cloud-Key (UCK-G2-Plus) located behind the router, but does not have routing functions.
Please provide some guidance to what may go happening?
Thank you,
Michael
SPARTAN STRONG!
@Virgo Thank for the reply and the interest.
The ER605 has 3 WAN ports;
WAN & WAN/LAN1 load balanced, WAN/LAN2 as a Link Backup.
Port 5 goes to my UI USW-Lite-16-PoE switch (Port 9).
The following is the network map from the switch:
The other interesting thing I stumbled across this evening, is the AP's see the devices:
but still cannot ping them:
M
