RobertMEFLV2Online
Following: 0Followers: 0
Forums/ Routers
2022-09-10 21:00:11
Re: dual wan setup load balancing
@tl12 when you are using the standalone mode, you need to setup a link-backup rule for this to happen and then you can set online-detection. But you are limited to 1 minute of detection interval....
1HELPFULS
Forums/ Routers
2022-09-10 20:57:55
Re:ER605 as a second router in network
@Wuch the problem here is, that you MUST have different subnets on both sides of the ER605 router. Because it is a NAT-router and therefore translates all IP addresses from its LAN side to one single...
1HELPFULS
Forums/ Routers
2022-09-10 20:53:43
Re:Network with dual WAN as backup
@KS_Peer the ER605 does not care, where the WAN signal comes from, you can setup whatever private network you want in front of the router. The only issue with that setup is, that the omada controller...
1HELPFULS
Forums/ Routers
2022-09-10 20:46:03
Re:ER605 for dual WAN load balance and failover?
kashif789us wrote @Virgo , thank you. What I have understood is that if my controller is cloud controller, minimum interval is 1 minute. If controller is either software or hardware locally, minimum...
2HELPFULS
Forums/ Controllers
2022-09-10 20:34:25
Re:How to setup L2TP with IPsec and unencrypted L2TP with TorGuard VPN
@btx do you know if TorGuard has actually VPN endpoints in different regions of the world? Is there a list/overview of IP-addresses of those endpoints?
0HELPFULS
Forums/ Requests & Suggestions
2022-08-18 12:29:09
Option to disable NAT on gateway
Not everybody is connecting the ER gateways directly to the internet, in my case the gateway is inside a DMZ and NAT is performed from the edge-routers. So the gateway is really nothing more than a...
0HELPFULS
1678...