RobertMEFLV2Online
Following: 0Followers: 0
Forums/ WiFi
2022-10-21 20:13:44
Re:EAP653 is not able to handle more than 800-850 MBit/s throughput (5GHz, WiFi 6) ?
GPB wrote @RobertMEF Similar results on my EAP670 (80mhz), when I run a speedtest (500mbps max) and iPerf3 with iphone (AX) and ipad (AC), same AP, I can only get a peak of about 650mbps. They don't...
0HELPFULS
Forums/ WiFi
2022-10-21 15:53:25
EAP653 is not able to handle more than 800-850 MBit/s throughput (5GHz, WiFi 6) ?
Hi, I was wondering, why I cannot get more than 850 MBit/s on the EAP653 APs? Even when multiple devices streaming at once, 850 MBit is the limit. Find that quite frustrating, because Ive tested a...
0HELPFULS
Forums/ Controllers
2022-10-06 18:39:14
Re:Policy routing - most specific subnet does not work
I found a workaround though. It looks like the list of policies is gone through top to bottom and the order of the list is purely the time of creation of the policy. So if I want the more specific...
0HELPFULS
Forums/ Requests & Suggestions
2022-10-06 11:59:52
Policy Routing - more specific route is not used
Hello, I have setup some IP-Groups with less specific routes (50.0.0.0/8 for example), which should be routed to a specific VPN-gateway. But in the /8 network are a few /18 I want to exclude from...
2HELPFULS
Forums/ Controllers
2022-10-03 20:01:10
Policy routing - most specific subnet does not work
Hi, as it seems, more-specific routing (which is the correct way of L3-routing) is not supported on TP-Link devices? Which means, if I set a policy for some /8 network to be routed to a specific...
0HELPFULS
Forums/ Controllers
2022-10-03 19:47:13
Re:How to setup L2TP with IPsec and unencrypted L2TP with TorGuard VPN
@btx if I want to use US streaming services, I need an UnitedStates-IP, therefore I must tunnel to the US. And even if I use a dedicated IP I must tunnel to the endpoint. So nothing changes in my...
0HELPFULS
1567...