I found the issue, Im using a Unifi switches and RSTP was activated. It seems that the ER7206 was forwarding the frames from VLAN1 to VLAN2 and therefore creating the loop. after disabling RSTP it...

Hello, I have two VLANs with different networks. Both VLANs are set to untagged to only one port each. Both ports are now connected to one switch, where both ports are set to VLAN1 untagged, that...

Hello, TP-Link never replied on other requests and they are locked, so here we go again: we need a dedicated setting "Client Isolation" or "SSID Isolation" for access-points to block all L2 traffic...

Im working in the field of wireless networks over different kind of radios for more than 20 years, so of course I know all that simple stuff what to look for. Ive tested at least 30 different APs and...

After years of experimenting and trying to find ANY information (as a matter of fact there is no information on this topic in the entire internet), its pretty clear to me, that spatial streams of...

Hello, as it stands, there is still no full IPv6 support for all router models of TP-Link? Is there any outlook that this will change in the foreseeable future? Especially the topic of IPv6 firewall...