Forums/
Routers
2023-04-16 19:29:10
Recently, I subscribed to Malwarebytes and when I logged in to my ER605 management console using a Web browser, malwarebytes blocked the page stating that it may be a malicious site! I had to add an...
0HELPFULS
Forums/
Routers
2022-09-14 15:18:11
Yes, setup was simple. Just fill in the blanks then I took the default in advance settings with site A as responder and site B as initiator. Both logs show "...ipsec connection successfully". Once in...
0HELPFULS
Forums/
Routers
2022-09-13 20:43:00
Also, do the Local and Remote network in the ipsec config be different from the LAN IP's of the respective ER605? The LAN in the ER605 in point A is 192.168.5.0/24 so I use that as the Remote network...
0HELPFULS
Forums/
Routers
2022-09-13 17:03:09
Okay. I have set up ipsec site-to-site vpn on both ER605. Yes, ddns is accepted! Well, the logs on both sites says they are connected but I cannot ping the remote local IP from my LAN. Do I have to...
0HELPFULS
Forums/
Routers
2022-09-13 02:04:12
After further research, I am surprised to see the MAC of the WAN port of my ER605 is E8-48-B8-xx-xx-FF and the MAC address of the perpetrator is E8-48-B8-xx-xx-FE. So it could be from a device inside...
1HELPFULS
Forums/
Routers
2022-09-13 00:14:01
Hello! Can the site-to-site VPN in the ER605 take Dynamic host names? I have DDNS on both sites A and B. Thanks. Also, will IPSec VPN takes too much bandwidth on both sites? Thanks again.
0HELPFULS