@shberge Thanks, I may hold fire since my controller is on another site. I currently have site to site VPN's configured, but if they get wiped, then I'm going to lose that. I have configured the...

Hello everyone, I have a site that has a manually configured ER605 performing load balancing across two WAN networks with an EAP225 connected, also manually configured. I have set the controller...

@Somnus Thanks for your input :) I would normally do a site to site between them, but because they are both connected to the mobile network, they have CG-NAT in front of them. I will give your other...

Good Morning, I'm hoping someone might be able to assist here. I am managing two sites remotely, both sites are connected via mobile data, so have CG-NAT. There are two sites at the same location,...

Good Afternoon, Hoping someone might be able to assist here. I have a remote Omada setup with an ER605 router and also a similar setup at another site, I've established a site to site VPN between the...

@Dez-uk The EAP-225 will work with Passive POE @ 24v. I use a Tycon 12v to 24v PoE injector (https://www.msdist.co.uk/tycon-systems/dc-dc-converters/12v-24v-poe-injector) Best Regards Chris