@Fae The speed when connecting my computer via ethernet cable to the LAN port of the CPE_Client is 75Mbps. It doesn't make sense for the router that I connected to the LAN port of the CPE_Client to...

@Fae Under Monitor=>Station on the CPE_AP: Throughput Stations Interfaces ARP Table Routes DHCP Clients MAC Address Device Name Associated SSID Signal / Noise(dBm) Chain0/Chain1 CCQ (%) Negotiated...

@Fae Edit: The hardware version is 2. The following speeds were achieved: Rx: 3.16Mbps, TX: 12.13Mbps, Total: 15.29Mbps.

I've got two CPE210 setup ~150ft apart sitting in the windows of two houses pointed directly at each other. The connection from the internet is 100Mbps down and 10Mbps up to the AP side and the...

@Wachako There is an RJ45 plug in the back panel of the CPE210. You can expose the plug by sliding down the weather-proofing access door. Plug the modem into the LAN port of the power block and then...