TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-07-27
2017-07-27 05:46:07
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-07-27
TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2017-07-27 05:46:07
Tags:
Model :
Hardware Version :
Firmware Version :
ISP :
Dear forum readers / writers,
I'm currently struggling with a strange error message popping up when trying to set up 802.11q VLAN: "Amount of VLAN is full" The error message occurs when trying to simply configure a VLAN using VLAN-ID 100, one tagged and two untagged ports. Some tests have shown that the error message neither depends on amount of ports in VLAN nor VLAN-ID or VLAN name.
Just to provide you with an overview of what I'm trying to achieve:
Used enviroment
Switch TL-SG1016PE
AP EAP245
Router FritzBox 7590 (doesn't support VLAN)
Goal
AP provides "main WLAN" without VLAN-ID
[*]AP provides "guest WLAN" with VLAN-ID 100
[*]AP connects to switch's port 5
[*]Switch provides guest WLAN untagged to port 11 (guest WLAN uplink to FritzBox)
[*]Switch provides main WLAN to port 10 (all other traffic uplink to FritzBox)
Did anybody already faced that message? And if so: What am I doing wrong?
Thanks in advance and best regards,
Stephan
Hardware Version :
Firmware Version :
ISP :
Dear forum readers / writers,
I'm currently struggling with a strange error message popping up when trying to set up 802.11q VLAN: "Amount of VLAN is full" The error message occurs when trying to simply configure a VLAN using VLAN-ID 100, one tagged and two untagged ports. Some tests have shown that the error message neither depends on amount of ports in VLAN nor VLAN-ID or VLAN name.
Just to provide you with an overview of what I'm trying to achieve:
Used enviroment
Switch TL-SG1016PE
AP EAP245
Router FritzBox 7590 (doesn't support VLAN)
Goal
AP provides "main WLAN" without VLAN-ID
[*]AP provides "guest WLAN" with VLAN-ID 100
[*]AP connects to switch's port 5
[*]Switch provides guest WLAN untagged to port 11 (guest WLAN uplink to FritzBox)
[*]Switch provides main WLAN to port 10 (all other traffic uplink to FritzBox)
Did anybody already faced that message? And if so: What am I doing wrong?
Thanks in advance and best regards,
Stephan
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
15 Reply
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-07-28
Same Problem The amount of VLAN is full
2017-07-28 15:01:26
Hello,
i have the same Problem.
When i enter a vlan i got the message : The amount of VLAN is full:
Firmeware of TL-SG1016DE 3.0 is 1.0.1 Build 20170530
Any Idee ?
Thanks Bernd
i have the same Problem.
When i enter a vlan i got the message : The amount of VLAN is full:
Firmeware of TL-SG1016DE 3.0 is 1.0.1 Build 20170530
Any Idee ?
Thanks Bernd
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#2
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2017-08-17
System Reset
2017-08-17 12:47:39
I was having the same issue after a fresh firmware install (Hardware:
TL-SG1016DE 3.0, Firmware: 1.0.1 Build 20170530 Rel.39380). I did a system reset and re-enabled 802.1Q VLAN option - that resolved the issue for me. Before the system reset, with 802.1Q VLAN enabled I noticed that the Default_VLAN wasn't listed.
1
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
1
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#3
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-08-17
Re:TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2017-08-17 19:57:23
Hello.... just wanted to let the group know I'm experiencing the same issue on a new TL-SG1024DE
An answer to this question would be much appreciated.
Thanks,
Joe
An answer to this question would be much appreciated.
Thanks,
Joe
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#4
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-08-17
Re:TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2017-08-18 20:35:36
System reset fixed my 802.1Q VLAN too... Default_VLAN was not visible before reset as Davidj2 said...
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#5
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 247
Helpful: 40
Solutions: 1
Stories: 0
Registered: 2018-07-19
Re:TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2017-08-21 17:40:54
I think you updated the firmware then met this issue.You only need reset switch , this issue will be solved.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#6
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-08-17
Re:TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2017-08-22 02:00:38
Just to be clear... my situation was with a new switch (
TL-SG1024DE)... not after updating the firmware. The installed firmware was up to date on my new switch... but still required the reset.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#7
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 181
Helpful: 6
Solutions: 0
Stories: 0
Registered: 2018-07-19
Re:TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2017-08-25 09:15:07
AntiJoe wrote
Just to be clear... my situation was with a new switch ( TL-SG1024DE)... not after updating the firmware. The installed firmware was up to date on my new switch... but still required the reset.
Strange, I have a TL-SG1024DE too. A new one of V3, it work just fine to set VLAN. The problem will happen only after I upgrade the firmware to 170530. What's your firmware version?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#8
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-08-30
Re:TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2017-08-30 21:07:25
(Almost the) same problem here - German retail version of the switch.
When I enter a VLAN definition, the answer from the switch is always "failed".
I've tried everything what the support people told me: different browser, remove antivirus software (the switch just generates a GET command and doesn't need any additional software), resetting the switch this way or another. I even exchanged the switch, and went through the same problems.
Now it seems that it is a bug in the firmware. OK, I will wait a few weeks and see if a new firmware is available.
Otherwise the TP-Link hardware is really fine, no questions asked.
When I enter a VLAN definition, the answer from the switch is always "failed".
I've tried everything what the support people told me: different browser, remove antivirus software (the switch just generates a GET command and doesn't need any additional software), resetting the switch this way or another. I even exchanged the switch, and went through the same problems.
Now it seems that it is a bug in the firmware. OK, I will wait a few weeks and see if a new firmware is available.
Otherwise the TP-Link hardware is really fine, no questions asked.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#9
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 32
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2016-08-24
Re:TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2017-08-31 10:07:58
Georg wrote
(Almost the) same problem here - German retail version of the switch.
When I enter a VLAN definition, the answer from the switch is always "failed".
I've tried everything what the support people told me: different browser, remove antivirus software (the switch just generates a GET command and doesn't need any additional software), resetting the switch this way or another. I even exchanged the switch, and went through the same problems.
Now it seems that it is a bug in the firmware. OK, I will wait a few weeks and see if a new firmware is available.
Otherwise the TP-Link hardware is really fine, no questions asked.
Hey dude, I think this problem can be solved by reset the device after upgrading to the new firmware. As I can see, some people have the same issue and get recovered. Or maybe we are not the same issue?
We were talking about the 170530 firmware.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#10
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-08-30
Re:TL-SG1016PE (Ver. 39357) shows "amount of VLAN is full"
2017-08-31 23:47:10
Hi, Hibixa -
I tried resetting and new configuration a few times in the past, with not effect.
I have re-installed the installed firmware (170530), powered the switch off and on, did a reset and - much to my surprise - I was able to define my VLAN settings.
Thanks for your feedback which gave me the drive to try it again.
I tried resetting and new configuration a few times in the past, with not effect.
I have re-installed the installed firmware (170530), powered the switch off and on, did a reset and - much to my surprise - I was able to define my VLAN settings.
Thanks for your feedback which gave me the drive to try it again.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#11
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-07-27
2017-07-27 05:46:07
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-07-27
Information
Helpful: 0
Views: 3921
Replies: 15
Voters 0
No one has voted for it yet.
Tags
Report Inappropriate Content
Transfer Module
New message