VLAN with TL-SG1016DE and TL-WA1201
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello.
I have VLAN capable AP (TL-WA1201) on which I have main vlan 1 and additional 10 and 20.
It is connected to VLAN capable switch (TL-SG1016DE) on port 3.
pfsense box is connected to the same switch on port 1.
With switch configured like this:
Devices connected to vlan'ed (20) ssid are getting IP from proper range (192.168.20.0) - so far so good.
pfsense config for vlan20:
Whenever traffic reaches pfsense, it is allowed to get through:
The problem is, that most of the traffic is dropped, not reaching router:
When I open monitoring page on switch console, I can see lots of RxBadPkt:
It is worth to mention, that when I connect to ssid with vlan tag 1, the default one, non of packets are lost, it is rock solid.
What could be the issue here? Am I missing something?
Both devices are on newest rom available.