Business Community > All Threads > TL-sg3424
< All Threads

TL-sg3424

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-sg3424

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-sg3424
TL-sg3424
2016-08-03 16:17:09
Model :

Hardware Version :

Firmware Version :

ISP :

Good morning I have bought a switch tl-sg3424. I have been able to access to the bootrom and I can reset and reboot the switch but when I try to change the ip interface on this menu with the command "ifconfig" the changes was not applied.

Why don't this changes apply?

Regards. Sorry for my English, I'm writing from Spain
  0      
 
  0      
 
#1
Options
2 Reply
Re:TL-sg3424
2016-08-30 15:36:15
What you really want to do with the switch? Change the IP of the switch? If so, you need to use the follow command:
(e.g.you want to change ip for 192.168.0.10)

TL-SG3424(config)# interface vlan 1
TL-SG3424(config-if)# ip address 192.168.0.10 255.255.255.0
  0  
  0  
#2
Options
Re:TL-sg3424
2016-08-31 15:08:16
Thank you for your answer. I was exploring all the capabilities of the switch. I know than i can change the ip address through the CLI and the GUI, but I wanted to change it in the bootrom menu. Imagine that you want to access the switch and you don't know the ip address and you don't want to waste your time looking for it scanning the net.

Regards.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 806

Replies: 2

Related Articles
TL-SG3424 no Gateway available
581 0
Tl-sg3424
982 0
Trunk port on TL-SG2210P and TL-SG3424
1002 0
Vlans on TL-SG3424
1058 0
TL-SG3424 vs. TL-SG3424P
1420 0
Tl-sg3424 vlan setup
1454 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.