WAN and WAN/LAN1 as primary on er605 on omada controller

WAN and WAN/LAN1 as primary on er605 on omada controller

WAN and WAN/LAN1 as primary on er605 on omada controller
WAN and WAN/LAN1 as primary on er605 on omada controller
a week ago
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.6

Hi TP-Link.

 

Is it possible to configure both WAN and WAN/LAN1 as primary and still the backup link is WAN/LAN1? 

 

I have 2 ISP and I want to use it at the same time as primary wan but still want to have the 2nd isp as backup link in WAN/LAN1.

 

 

Thank you.

  0      
  0      
#1
Options
5 Reply
Re:WAN and WAN/LAN1 as primary on er605 on omada controller
a week ago

  @Bugs123 

 

Hi,

 

You can use load balancing and link backup at the same time. Here's more info about that:

https://www.tp-link.com/pl/support/faq/4058/

 

Just keep in mind that Load Balancing is based on sessions, so part of sessions are getting redirected to ISP2 if the ISP1 is fully occupied. The ratio of those sessions you set up in the Load Balancing section.

That mean, you are not aggregating the links to double the internet speed for your clients...

 

If you are looking for utilizing both WANs at the same time to increase the network speed for clients, I believe you are looking for LAG feature (link aggregation). THat functionality is not supported by TP-Link routers, only some switches.

 

Cheers

  1  
  1  
#2
Options
Re:WAN and WAN/LAN1 as primary on er605 on omada controller
a week ago

  @RaRu 

 

Can I use the policy routing so that I can route the other vlan to my other isp? With this method we can utilize our isp. And what will be the steps.

 

Bugs

  0  
  0  
#3
Options
Re:WAN and WAN/LAN1 as primary on er605 on omada controller
a week ago

  @Bugs123 

 

Hi, 

 

You can as far as I know. I won't help with that since I have no experience with this. Sorry. 

 

Keep in mind that this solution has one disadvantage, once the ISP is down, the policy will still try to push the traffic via this WAN so... It will end up as there's no internet for those clients. 

  1  
  1  
#4
Options
Re:WAN and WAN/LAN1 as primary on er605 on omada controller
a week ago

Hi @RaRu 

RaRu wrote

  @Bugs123 

 

Hi, 

 

You can as far as I know. I won't help with that since I have no experience with this. Sorry. 

 

Keep in mind that this solution has one disadvantage, once the ISP is down, the policy will still try to push the traffic via this WAN so... It will end up as there's no internet for those clients. 

That's partially correct.
Still have the option to use Priority or Only mode in standalone PBR. It is up to how he sets it up.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#5
Options
Re:WAN and WAN/LAN1 as primary on er605 on omada controller
a week ago
Hi @Clive_A, How to use this priority or only mode? Lui
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 111

Replies: 5

Related Articles