ER605 wan issue

ER605 wan issue

ER605 wan issue
ER605 wan issue
Yesterday - last edited Yesterday
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.6 Buid 20240718 Rel 82712

Hi,

 

I have just bought a new ER605 router to compliment my full TP link setup that i have, the issue i've got is that when i configure the wan port just like my old TL-R600VPN

its giving me a completly different WAN ip address which is a local ip it seems to treating it as a lan rather than wan port for some reason i've flashed it to the latest firmware but its still the same I'm hoping someone can shed some light on whats going wrong i've attached both routers to show the difference between them.

 

  0      
  0      
#1
Options
2 Accepted Solutions
Re:ER605 wan issue-Solution
Yesterday - last edited Yesterday

Hi @Cannonz 

Thanks for posting in our business forum.

This is not a problem at the router's system level.

You should contact your ISP regarding this matter.

Not sure the reason why but your ISP defines the IP and gateway based on the PPPoE.

 

It's either behind a modem router. Or your ISP withdraws your public IP address for a reason.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
Re:ER605 wan issue-Solution
14 hours ago - last edited 11 hours ago

  @Cannonz 

 

Thanks guys for all your input it got me thinking and I doubled checked my ppoe credentials and I had done a typo in my username which i

hadn't noticed initially, fixed that and hey presto sorted.

sometimes it just takes someone else to point out the obvious that can you can overlook that's why I love help forums like this there's always

somone will point you in the right direction to a resolve


Thanks again

Craig

 

Recommended Solution
  1  
  1  
#4
Options
3 Reply
Re:ER605 wan issue-Solution
Yesterday - last edited Yesterday

Hi @Cannonz 

Thanks for posting in our business forum.

This is not a problem at the router's system level.

You should contact your ISP regarding this matter.

Not sure the reason why but your ISP defines the IP and gateway based on the PPPoE.

 

It's either behind a modem router. Or your ISP withdraws your public IP address for a reason.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
Re:ER605 wan issue
23 hours ago

  @Cannonz 

 

The ER605 isnt making a PPPoE connection. Either you don't have the correct PPPoE credentials configuration or possibly your ISP has 'locked' the connection to the previous routers MAC address. If the PPPoE config is correct, then try cloning the MAC address on the ER605

  1  
  1  
#3
Options
Re:ER605 wan issue-Solution
14 hours ago - last edited 11 hours ago

  @Cannonz 

 

Thanks guys for all your input it got me thinking and I doubled checked my ppoe credentials and I had done a typo in my username which i

hadn't noticed initially, fixed that and hey presto sorted.

sometimes it just takes someone else to point out the obvious that can you can overlook that's why I love help forums like this there's always

somone will point you in the right direction to a resolve


Thanks again

Craig

 

Recommended Solution
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 79

Replies: 3

Related Articles