Business Community > All Threads > Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN
< All Threads

Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN

Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN

Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN
Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN
2024-08-15 13:59:54 - last edited 2024-08-16 02:15:45
Tags: #WAN Setup
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.6 Build 20240718 Rel.82712

Hi

I have two WAN interfaces. and my new ER605 ALWAYS use backup WAN (100mbs) as Primary WAN and my Primary WAN (1000gbps) is not used it is resting all the time

 

 

Whats happening? Load balance disabled. all outgoing traffic goes through backup WAN. speedtest and my ip shows backup isp

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN-Solution
2024-08-16 02:15:42 - last edited 2024-08-16 02:15:45

Hi @YuriyB 

Thanks for posting in our business forum.

In the configuration guide, we have clearly instructed you to enable the load balancing if you need link backup. You did not enable it at all and of course, the system did not function properly.

https://www.tp-link.com/en/support/faq/2133/

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#3
Options
3 Reply
Re:Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN
2024-08-15 14:11:00 - last edited 2024-08-16 01:19:21

 my two PPTP Clients are using WAN (Primary)  and connections established i can see it on server side ( shows my PRIMARY WAN IP)

 

but all another traffic goes through backup WAN2

tp-link did u test it??

  0  
  0  
#2
Options
Re:Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN-Solution
2024-08-16 02:15:42 - last edited 2024-08-16 02:15:45

Hi @YuriyB 

Thanks for posting in our business forum.

In the configuration guide, we have clearly instructed you to enable the load balancing if you need link backup. You did not enable it at all and of course, the system did not function properly.

https://www.tp-link.com/en/support/faq/2133/

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#3
Options
Re:Omada ER605 LINK BACKUP confuses primary WAN and Backup WAN
2024-08-16 15:37:37

  @Clive_A ticket closed. thank you

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 516

Replies: 3

Tags

WAN Setup
Related Articles
ER605 as VPN client with link backup WAN/WAN2
376 0
ER605 No backup wan option available
676 0
ER707-M2 - Primary WAN Slows Down when Backup WAN Is In Use
688 0
ER605 v2.0, dual wan with primary and (usually idle) backup wan does not work
1041 0
Omada ER605 leaking MAC addresses on WAN interface
1939 0
Er605 is not showing all WAN in link backup section even though i have two WAN connected.
964 2
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.