Port usage for Multi WAN with Load Balancing

Port usage for Multi WAN with Load Balancing

Port usage for Multi WAN with Load Balancing
Port usage for Multi WAN with Load Balancing
2024-08-28 07:48:36 - last edited 2024-08-29 01:48:28
Model: ER7206 (TL-ER7206)  
Hardware Version: V2
Firmware Version: 2.1.2 Build 20240324 Rel.46738

Curent Setup 

Have 2 ISPs with identical speed connected with 2 Ports - Port 2 and Port 3 

Enable Load Balancing - Checked

Enable Application Optimized Routing - Checked

Enable Bandwidth Based Balance Routing on port(s): - Not Checked 
Link Backup - Not configured 
Online Status - Both Ports Online 

I see Port 3 is being utilized more than port 2 for session/Data. It should be 50:50,  isn't it ? 

 


Am I missing something ? Please advice 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Port usage for Multi WAN with Load Balancing-Solution
2024-08-29 01:46:05 - last edited 2024-08-29 01:48:28

Hi @macfan007 

Thanks for posting in our business forum.

Recommend you check the pinned thread on the router page.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:Port usage for Multi WAN with Load Balancing-Solution
2024-08-29 01:46:05 - last edited 2024-08-29 01:48:28

Hi @macfan007 

Thanks for posting in our business forum.

Recommend you check the pinned thread on the router page.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
Re:Port usage for Multi WAN with Load Balancing
2024-08-29 13:33:37

@Clive 

Thanks . I read point#10 
 

So, you should consider if the traffic is repeated based on the IP. For example, if you watch a movie from the streaming platform, you should not be load balanced and you should enable the Application Optimized Routing.


I think it should be OR &  not and  . Pl check again. 

I am doing load ballancing and enabled optimised too. (not agreegating). Streaming service is working fine. 
 

 

  0  
  0  
#3
Options
Re:Port usage for Multi WAN with Load Balancing
2024-08-30 01:09:29

Hi @macfan007

macfan007 wrote

@Clive 

Thanks . I read point#10 
 

So, you should consider if the traffic is repeated based on the IP. For example, if you watch a movie from the streaming platform, you should not be load balanced and you should enable the Application Optimized Routing.


I think it should be OR &  not and  . Pl check again. 

I am doing load ballancing and enabled optimised too. (not agreegating). Streaming service is working fine. 
 

 

You don't really seem to get the point. I am reasoning an example instead of asking if your streaming is fine or not. And you seem to be very confused and focused on the grammar. Nice to have you here to examine my grammar. However, I have used third-party grammar to examine that and I don't think there is a pop-up notification about that.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 317

Replies: 3

Related Articles