Multi-WAN Failover

Multi-WAN Failover

Multi-WAN Failover
Multi-WAN Failover
2024-06-01 13:05:20 - last edited 2024-06-03 08:00:04
Model: ER7206 (TL-ER7206)  
Hardware Version: V2
Firmware Version: 2.0.1 Build 20230705 Rel.75930

Hello everyone, I'm currently struggling to configure a multi-wan link backup fail over rule for my tp-link omada ER7206 multi-wan router. We have pretty inconsistent services across our Fibre ISP providers. So we have 2 fibre ISPs and one Starlink connection for a total of 3 WAN interfaces. Our desired failover configuration would be to fail over each WAN interface sequentially. ie if WAN1 is offline, try WAN2, if WAN2 is offline, try WAN3. But the link back up configuration prevents this, for no good reason.

 

How then can i configure multi-wan failover?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Multi-WAN Failover-Solution
2024-06-03 00:57:27 - last edited 2024-06-03 08:00:04

Hi @NetworkingNoob 

Thanks for posting in our business forum.

It is doable. This link below should answer your question, see the policy routing part:

Common Questions About the Load Balancing, Link Backup(Failover) & Online Detection

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  2  
  2  
#2
Options
2 Reply
Re:Multi-WAN Failover-Solution
2024-06-03 00:57:27 - last edited 2024-06-03 08:00:04

Hi @NetworkingNoob 

Thanks for posting in our business forum.

It is doable. This link below should answer your question, see the policy routing part:

Common Questions About the Load Balancing, Link Backup(Failover) & Online Detection

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  2  
  2  
#2
Options
Re:Multi-WAN Failover
2024-06-03 08:00:45
Yes the recommended work around for this works for me, thanks!
  1  
  1  
#3
Options

Information

Helpful: 0

Views: 731

Replies: 2

Related Articles