Business Community > All Threads > Switch configured to use two VLANs. Connected devices don't use either.
< All Threads

Switch configured to use two VLANs. Connected devices don't use either.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Switch configured to use two VLANs. Connected devices don't use either.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Switch configured to use two VLANs. Connected devices don't use either.
Switch configured to use two VLANs. Connected devices don't use either.
2024-04-11 22:30:27 - last edited 2024-04-12 05:42:50
Tags: #VLAN & Multi-Networks
Model: TL-SG105E  
Hardware Version: V5
Firmware Version: 1.0.0 Build 20211209 Rel.52640

I have my switch connected a router running pfSense that is configured with 3 VLANs (tagged as 110, 120 & 130).  I've got two ports in the switch configured to use two of those VLANs (see the following screenshot) -- the third is only intended to be accessed via WiFi.  When I connect my laptop to port 4 (assigned to use VLAN 110), it is assigned an IP Address that reflects being in the default LAN.  My Roku TV is connected to port 5 (assigned to use VLAN 120), it is assigned an IP Address that also reflects being in the default LAN.  My laptop (that I'm using to type this post) is currently connected to port 4 but it connects using the default LAN (IP address is in the 10.1.1.0/24 network) so I can confirm that the router does allow internet connection.  My Roku is connected to port 5 and happily streams tv content via the default LAN (IP address is in the aforementioned network).  This is making my head hurt!

 

VLAN 110 (Called Primary in pfSense) is for my laptops -- my personal laptop and the one provided by my employer for work-from-home days.  VLAN 120 is for IoT devices so I can separate the many WiFi based -- less secure -- devices from everything else.

 

 

 

DHCP Server configuration per VLAN.  YES -- I know that's a lot of tabs.

 

 

 

 

Firewall rules.  For now, they all allow ALL traffic.  Once this actually works, I'll make them more restrictive.

 

 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Switch configured to use two VLANs. Connected devices don't use either.-Solution
2024-04-12 03:54:50 - last edited 2024-04-12 05:42:59

Hi @DonI49 

Thanks for posting in our business forum.

DonI49 wrote

  @Clive_A 

Thanks for the response.  

 

  1. If I'm reading your response correctly, I think that's what I said I did.  But to be clear:  I have:
    • an ethernet cable running from port 1 to the router. 
    • an ethernet cable running from port 5 to my Roku tv (should be in VLAN 120)
    • an ethernet cable running from port 4 to my laptop (should be in VLAN 110).
  2. Your response seems to imply that you're providing a link to an FAQ.  All I see is what appears to be the title of an FAQ topic.

Please kindly use the search function on our official website and our forum. Keywords are 802.1Q VLAN. It is a general knowledge about the VLAN. I will not repeat it here as you know about the VLAN and what to do.

 

I am not seeing what you are describing. Maybe I am wrong with your setup? Untagged is not trunk.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#4
Options
Re:Switch configured to use two VLANs. Connected devices don't use either.-Solution
2024-04-12 05:02:08 - last edited 2024-04-12 05:42:50

  @Clive_A 

I did search.  That's how I got to the link mentioned in my last reply.  That's also the link used when entering what I did before posting this question.  The first example matches pretty closely what I'm trying to setup.

 

Here's a screenshot taken FROM THAT PAGE.  The TAGGED column is blank.  But now that I know that's what you wanted me to do, I made the adjustment and it worked.  The second screenshot is what the settings look like after i made the requested change.


EDIT:  Yes -- I'm now using VLAN 10 and 20 instead of 110 and 120.  But the principal is still the same.

 

 

Recommended Solution
  1  
  1  
#5
Options
4 Reply
Re:Switch configured to use two VLANs. Connected devices don't use either.
2024-04-12 03:14:20

Hi @DonI49 

Thanks for posting in our business forum.

Uplink on the switch should be tagged with VLAN 110 and 120.

Try this FAQ out:

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#2
Options
Re:Switch configured to use two VLANs. Connected devices don't use either.
2024-04-12 03:49:08 - last edited 2024-04-12 03:53:15

  @Clive_A 

Thanks for the response.  

 

  1. If I'm reading your response correctly, I think that's what I said I did.  But to be clear:  I have:
    • an ethernet cable running from port 1 to the router. 
    • an ethernet cable running from port 5 to my Roku tv (should be in VLAN 120)
    • an ethernet cable running from port 4 to my laptop (should be in VLAN 110).
  2. Your response seems to imply that you're providing a link to an FAQ.  All I see is what appears to be the title of an FAQ topic.

 

EDIT:  right after posting my reply, I realized why that title looked so familiar -- that's what I was looking at when I entered what I did put in.  

 

https://www.tp-link.com/us/support/faq/788/

  0  
  0  
#3
Options
Re:Switch configured to use two VLANs. Connected devices don't use either.-Solution
2024-04-12 03:54:50 - last edited 2024-04-12 05:42:59

Hi @DonI49 

Thanks for posting in our business forum.

DonI49 wrote

  @Clive_A 

Thanks for the response.  

 

  1. If I'm reading your response correctly, I think that's what I said I did.  But to be clear:  I have:
    • an ethernet cable running from port 1 to the router. 
    • an ethernet cable running from port 5 to my Roku tv (should be in VLAN 120)
    • an ethernet cable running from port 4 to my laptop (should be in VLAN 110).
  2. Your response seems to imply that you're providing a link to an FAQ.  All I see is what appears to be the title of an FAQ topic.

Please kindly use the search function on our official website and our forum. Keywords are 802.1Q VLAN. It is a general knowledge about the VLAN. I will not repeat it here as you know about the VLAN and what to do.

 

I am not seeing what you are describing. Maybe I am wrong with your setup? Untagged is not trunk.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#4
Options
Re:Switch configured to use two VLANs. Connected devices don't use either.-Solution
2024-04-12 05:02:08 - last edited 2024-04-12 05:42:50

  @Clive_A 

I did search.  That's how I got to the link mentioned in my last reply.  That's also the link used when entering what I did before posting this question.  The first example matches pretty closely what I'm trying to setup.

 

Here's a screenshot taken FROM THAT PAGE.  The TAGGED column is blank.  But now that I know that's what you wanted me to do, I made the adjustment and it worked.  The second screenshot is what the settings look like after i made the requested change.


EDIT:  Yes -- I'm now using VLAN 10 and 20 instead of 110 and 120.  But the principal is still the same.

 

 

Recommended Solution
  1  
  1  
#5
Options

Information

Helpful: 0

Views: 506

Replies: 4

Tags

VLAN & Multi-Networks
Related Articles
connect two VLANs on managed switch
302 0
1xPC with 2xLAN connected to switch
976 0
Problem with separating ports on switch
115 0
switch wont accept multiple vlans from cisco
1498 0
How to combine VLANs from two SDNs?
1014 0
Managed switch with more than 32 vlans
496 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.