connect two VLANs on managed switch
Hello,
It is possible on an TL-SG2008 V3 switch where there is set up on Eth1, 2 and 3 VLAN01 and on Eth4, 5 and 6 VLAN02 configure also ports Eth7 and 8 where PCs conencted to this ports can communicate on bot VLAN1 and VLAN2 ?
So if I have a PC connected for example to Eth7 this macchine can communicate both ways with macchines on VLAN1 and VLAN2 ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @ESM60
You will need to create VLAN interface on the switch, and let the client devices use this switch as their gateway.
The switch can create the routing between these VLAN interfaces.
Here is an example:
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches
ESM60 wrote
Hello,
It is possible on an TL-SG2008 V3 switch where there is set up on Eth1, 2 and 3 VLAN01 and on Eth4, 5 and 6 VLAN02 configure also ports Eth7 and 8 where PCs conencted to this ports can communicate on bot VLAN1 and VLAN2 ?
So if I have a PC connected for example to Eth7 this macchine can communicate both ways with macchines on VLAN1 and VLAN2 ?
- Copy Link
- Report Inappropriate Content
Hi @ESM60
You will need to create VLAN interface on the switch, and let the client devices use this switch as their gateway.
The switch can create the routing between these VLAN interfaces.
Here is an example:
How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches
ESM60 wrote
Hello,
It is possible on an TL-SG2008 V3 switch where there is set up on Eth1, 2 and 3 VLAN01 and on Eth4, 5 and 6 VLAN02 configure also ports Eth7 and 8 where PCs conencted to this ports can communicate on bot VLAN1 and VLAN2 ?
So if I have a PC connected for example to Eth7 this macchine can communicate both ways with macchines on VLAN1 and VLAN2 ?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 343
Replies: 1
Voters 0
No one has voted for it yet.