er605 vpn router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

er605 vpn router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
er605 vpn router
er605 vpn router
2023-12-20 18:43:42
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2

Hello guys i have just setup my er605 with wireguard vpn through surfshark and works perfectly.But i run the vpn in all lan ports. i have created a vlan with different ip and i have untagged it in lan port 2 and works fine.But how i can route wireguard vpn only in this vlan port and other ports have my isp traffic?

 

thank you all

  0      
  0      
#1
Options
2 Reply
Re:er605 vpn router
2023-12-21 01:11:27

  @lefterissim 

 

Do I understand correctly that you want 1 port to egress through your Wireguard tunnel, and the other ports, to go normally via your ISP's default route?

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re:er605 vpn router
2023-12-21 02:10:38

Hi @lefterissim 

Thanks for posting in our business forum.

Not sure how you config it. WG is capable of splitting the traffic by modifying the allowed IP.

 

But if you need to Policy Routing, this is not available yet.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#3
Options