Business Community > All Threads > ER8411 V1 firmware 1.1.0 update feedback
< All Threads

ER8411 V1 firmware 1.1.0 update feedback

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER8411 V1 firmware 1.1.0 update feedback

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER8411 V1 firmware 1.1.0 update feedback
ER8411 V1 firmware 1.1.0 update feedback
2023-07-12 16:50:30 - last edited 2023-07-12 19:15:12
Tags: #Firmware Update #Load Balancing #WAN Setup #New Firmware
Model: ER8411  
Hardware Version: V1
Firmware Version: 1.1.0

Hi All.

 

Any other experiens issue after update to firmware 1.1.0 ?

System has been running 50 days before update,with no issue, all wan showed online status.

 

My setup:

Router ER8411 V1

Omada controller oc300

Version: 5.11.10

Build: 1.18.2 Build 20230704 Rel.64637

And some switches and EAP670

 

Issue after update:

Im using 3 isp/wan 1-4-5 load balance with backup.

Now the backup wan5 always shows offline in omada, but its not offline.

Set all 3 wan to load balance and all shows online.

Set wan5 back to backup, goes back to offline.

 

Overview

SFP+ WAN1Online

WAN/LAN4Online

WAN/LAN5Offline

 

Load Balancing

Load Balancing Weight:

 

 

 

Application Optimized Routing:

  • Enable

Link Backup:

  • Enable

Primary WAN:

SFP+ WAN1WAN/LAN4

Backup WAN:

WAN/LAN5

Backup Mode:

Always Link Primary

Mode:

Enable backup link when all primary WANs fail

 

Any toughts forum ?

 

Reg

Langis

  0      
 
  0      
 
#1
Options
5 Reply
Re:ER8411 V1 firmware 1.1.0 update feedback
2023-07-13 02:57:29

Hi @Langis 

For the Failover(link backup), the backup WAN shows offline while it is not in active use. If the primary WAN(s) is(are) down, the backup WAN will show up as Online.

This is the way how it works. In the WAN setting page, you should find the port is actually getting network information from your ISP.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:ER8411 V1 firmware 1.1.0 update feedback
2023-07-13 03:24:49

  @Clive_A 

 

Hi Clive, 

 

Could someone at TP link please acknowledge this ?

 

https://community.tp-link.com/en/business/forum/topic/614902

I was in contact with support and have not received a response since June 30th and have tried 1.04 beta and the new 1.1.0 

  0  
  0  
#3
Options
Re:ER8411 V1 firmware 1.1.0 update feedback
2023-07-13 08:16:39

  @Clive_A 

 

Thanks for reply.

 

I can see on the wan port download bytes its increasing so then you have to be correct on this issue and its a hot connection.  It shuld be showing offline until activated.

 

I was in the impression when its offline its a cold conection, and for backup wan its best with hot connection. 

Belive this terms was used by asus routers time ago :-) 

 

See photos, backup is wan5:

  

 

  0  
  0  
#4
Options
Re:ER8411 V1 firmware 1.1.0 update feedback
2023-07-13 09:27:28

Hi @Langis 

Thanks for bringing up this to me. In essence, the port is not inactive. It works as a backup WAN but it does not mean it is inactive. Online Detection and your ISP may send packets through this port. For the ISP, it needs to update its information from time to time. Your WAN status shows the network information and that's because your WAN is syncing with your ISP.

The goal of the link backup is to maintain your connection and always be ready for any disconnection that may happen.

You can monitor this traffic from the time you reported it to us. And check how much data was used on this port. If this surges unusually while your backup WAN never comes up as the primary, that would be a concern for both you and me. Can you please first monitor this for a while?

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#5
Options
Re:ER8411 V1 firmware 1.1.0 update feedback
2023-07-13 10:37:59

  @Clive_A 

 

Hi.

 

Ok, i will monitor for some time :-) 

 

I see already download bytes incrising, upload still same. Backup not triggered. 

 

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1041

Replies: 5

Tags

Firmware Update Load Balancing WAN Setup
New Firmware
Related Articles
ER8411 v1.1.0 Disconnecting After Update
909 0
ER8411 feedback beta v1.0.4
2998 0
Uanble to upload the new BETA Firmware ER8411 v1.0.4
1482 1
ER8411 Load balance with 8 ISPs
213 0
Repeating Notification of "DHCP Server allocated IP address" Issue on ER8411 V1
1048 0
ER8411 & DHCP WAN ?
512 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.