EAP 610 outdoor disconnected
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I got a EAP 610-outdoor but I keep getting the message "disconnected". Does anybody know how to fix this?
Current setup:
- Router is placed in fuse box which is connected to TP switch TL-SG2210MP (V3.0, Firmware 3.0.5)
- Switch is connected with cat6 cable to EAP 615-Wall (EU, V1.0, firmware 1.1.6)
distance between switch and 615-Wall is about 10 / 12 meters
- From 615-Wall I connected a cat6 outdoor cable to the 610-outdoor via the ETH socket underneath the 615-Wall.
distance 615-Wall and 610-Outdoor less then 1 meter
- 610-Outdoor is PoE with TP-Link POE2412G PoE-injector.
The 610-outdoor has a IP-adress and it is visable via my OC200 controller.
If I plug the 610-Outdoor directly into the switch it is working correctly.
When I setup the 610-Outdoor as AP via it`s IP-adress I see wireless SSID but no internet or it keeps loosing it`s connection.
Hi @Roel81，
EAP610-Outdoor need to be powered by the 48V/0.5A Passive PoE, please check the specification out:
But the POE injector TL-POE2412G is a 24V 12W Passive PoE Adapter, it is not powerful to feed the EAP610-Outdoor.
Hi @Roel81，
EAP610-Outdoor need to be powered by the 48V/0.5A Passive PoE, please check the specification out:
But the POE injector TL-POE2412G is a 24V 12W Passive PoE Adapter, it is not powerful to feed the EAP610-Outdoor.