Business Community > WiFi > Unable to get IP from Verizon router while connecting through EAP245
< WiFi

Unable to get IP from Verizon router while connecting through EAP245

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Unable to get IP from Verizon router while connecting through EAP245

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Unable to get IP from Verizon router while connecting through EAP245
Unable to get IP from Verizon router while connecting through EAP245
2017-06-25 07:44:08
Model : EAP245

Hardware Version : Not Clear

Firmware Version : 1.0.0 Build 20161116 Rel. 73287(5553)

ISP : Verizon FIOS

I am setting up an EAP245 at home as an AP, with my Verizon Quantum Gateway router set up as dhcp server. I've done this numerous times with other brand APs, with this Verizon router.

On the EAP245, I was able to:
1. access the web interface
2. set a static IP
3. verify that the AP is showing up in the Verizon router's My Network device list
4. configure multiple SSIDs
5. connect devices to the AP using the newly-created SSIDs

But, every device is failing to obtain an IP. What step am I missing?
  0      
 
  0      
 
#1
Options
5 Reply
Re:Unable to get IP from Verizon router while connecting through EAP245
2017-06-26 06:32:44

sk11 wrote


4. configure multiple SSIDs
5. connect devices to the AP using the newly-created SSIDs


How did you set up the Multi-SSID feature? Using VLANs for network segregation?
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:Unable to get IP from Verizon router while connecting through EAP245
2017-06-27 01:59:01

R1D2 wrote

How did you set up the Multi-SSID feature? Using VLANs for network segregation?


No, just created multiple SSIDs and passwords.
  0  
  0  
#3
Options
Re:Unable to get IP from Verizon router while connecting through EAP245
2017-06-27 02:36:18

sk11 wrote

No, just created multiple SSIDs and passwords.


Should work if your DHCP server is up and running. Tested it and it works on my EAP.

Double check the static IP of the EAP. If you can't find the cause for missing DHCP replies, reset the EAP to factory defaults and try with the default SSID first.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options
Re:Unable to get IP from Verizon router while connecting through EAP245
2017-06-27 10:47:13

R1D2 wrote

Should work if your DHCP server is up and running. Tested it and it works on my EAP.

Double check the static IP of the EAP. If you can't find the cause for missing DHCP replies, reset the EAP to factory defaults and try with the default SSID first.


I reset the AP to factory default, and it worked. I compared the settings in the default SSID and was able to create my own SSIDs afterwards which also worked. The differences this time were leaving wireless vlan ID as 0 and leaving load balance OFF. Not sure why those 2 would cause IP issues. Thank you for the assistance.
  0  
  0  
#5
Options
Re:Unable to get IP from Verizon router while connecting through EAP245
2017-06-27 18:52:29

sk11 wrote

The differences this time were leaving wireless vlan ID as 0 and leaving load balance OFF. Not sure why those 2 would cause IP issues.


See post #2. If you use Multi-SSID VLANs (i.e. setting wireless VLAN IDs to another value then 0), the router behind the EAPs must support VLANs, too. If it doesn't do so, it is actually your router causing IP issues, but not the EAPs.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1151

Replies: 5

Related Articles
unable to get OC200 to connect to network
701 0
 CPE510 unable to get WAN IP
627 0
 Clients get this message Unable to get ip address
864 0
ER605 and ipv6 on Verizon Fios
755 0
 Obtaining IP address unable to connect WiFi
648 0
 EAP110-Outdoor unable to get IP on DHCP — Cable Issue
662 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.