Hello, 

i configured an openvpn server on the ER605, i am able to connect to this location from any location (remotely) and i am able to connect to the routers ip and manage it remotely but i am not able to access the other clients from the network 192.168.55.x /24

Please see my current config of the openvpn server

The following is my client connected
 

When i tried to configure the ip pool to be from the 192.168.55.0 /24 network i was able to access my 192.168.55.254 web interface (i need to access this interface remotely).Do i need to setup some static routing? Or some firewall access? I followed the guide from this link and everything seems ok How to Configure TP-Link Omada Gateway as OpenVPN Server on Standalone Mode | Omada Network Support

Another info i am not sure if this can screw up things. This ER605 is my second router the main router is connected from the isp and it is using 192.168.1.x /24 network the second router (ER605) is running on the 192.168.1.2 static ip on the wan interface and got the ip adress of the lan 192.168.55.1 / 24 without dhcp server active on the lan.

Also please see my routing table


IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0     192.168.14.1     192.168.14.8    281
        127.0.0.0        255.0.0.0         On-link         127.0.0.1    331
        127.0.0.1  255.255.255.255         On-link         127.0.0.1    331
  127.255.255.255  255.255.255.255         On-link         127.0.0.1    331
      172.20.96.0    255.255.240.0         On-link       172.20.96.1    271
      172.20.96.1  255.255.255.255         On-link       172.20.96.1    271
   172.20.111.255  255.255.255.255         On-link       172.20.96.1    271
     192.168.14.0    255.255.255.0         On-link      192.168.14.8    281
     192.168.14.8  255.255.255.255         On-link      192.168.14.8    281
   192.168.14.255  255.255.255.255         On-link      192.168.14.8    281
     192.168.55.0    255.255.255.0     192.168.60.5     192.168.60.6    262
     192.168.56.0    255.255.255.0         On-link      192.168.56.1    281
     192.168.56.1  255.255.255.255         On-link      192.168.56.1    281
   192.168.56.255  255.255.255.255         On-link      192.168.56.1    281
     192.168.60.0    255.255.255.0     192.168.60.5     192.168.60.6    262
     192.168.60.4  255.255.255.252         On-link      192.168.60.6    262
     192.168.60.6  255.255.255.255         On-link      192.168.60.6    262
     192.168.60.7  255.255.255.255         On-link      192.168.60.6    262
        224.0.0.0        240.0.0.0         On-link         127.0.0.1    331
        224.0.0.0        240.0.0.0         On-link      192.168.56.1    281
        224.0.0.0        240.0.0.0         On-link      192.168.60.6    262
        224.0.0.0        240.0.0.0         On-link      192.168.14.8    281
        224.0.0.0        240.0.0.0         On-link       172.20.96.1    271
  255.255.255.255  255.255.255.255         On-link         127.0.0.1    331
  255.255.255.255  255.255.255.255         On-link      192.168.56.1    281
  255.255.255.255  255.255.255.255         On-link      192.168.60.6    262
  255.255.255.255  255.255.255.255         On-link      192.168.14.8    281
  255.255.255.255  255.255.255.255         On-link       172.20.96.1    271
===========================================================================
Persistent Routes:
  Network Address          Netmask  Gateway Address  Metric
          0.0.0.0          0.0.0.0     192.168.14.1  Default
===========================================================================

Any help to debug the issue would be usefull.

Thanks

Ervin