Hi  @MarcosSilvestre 

All EAPs and routers are broadcasting the same SSID, how did you notice the EAP650-outdoor didn't reconnect? 

Please describe a little the layout of the EAPs and routers installation and their distances; this may help us understand the issue better.

If the EAP650-outdoor is relatively far away from the uplink device, I believe this may be fixed if you move it a little closer.

  @Vincent-TP hi. Thanks for the question !

i can notice that the eap650 outdoor is not connected in the internet through the omada app. I can connect on it and in the host network tab it is displaying that it is not connected to any wifi. So the eap650 is not replicating the signal because it is not connected to internet. The equipments that connects to eap650 are complaining that is out of internet.

The location is not that far from it (max 15m away from eap610). Measuring the signal from other apps shows a very strong signal.
it works really good when it is connected (good signal, speed on 2.4 and 5 ghz as well). Issue is only when the energy is dropped...then i have to change the ssid that is broadcasting to another one and change it back (for me it does not make any sense put it works and is faster than doing the config reset).

Hi  @MarcosSilvestre 

Thanks for the reply.

So the EAP650-outdoor is wirelessly linked to the EAP610-outdoor, and the EAP610-outdoor is also under repeater mode, am I correct?

  @Vincent-TP correct. Boths replicating the same ssid