Connect Switch using Omada to a Fortigate FW 60 F
Good mornign
I have a TL-SG3452P Switch and I want to replace Cisco old device.
I have a OMADA Controller with several AP already configured in my laptop on VLAN 1.
Also, I use a Fortigate 60 F as Router.
- VLAN 1 for admin connection
- VLAN 100 for ethernet connections -> Users
- VLAN 300 for WIFI devices -> Users
- VLAN 15 for Guest
I try to connect the Switch an link the firewall on the port 1 on the switch to port 1 on the FW, but the controller cannot detect the switch to adopt it.
1- How I must do to see the Switch on the controller.
2- How I must configure the controller to connect the Switch with the FW and set the VLAN on the ports.