WAN Configuration
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WAN Configuration
Hi,
I have a ER605 on wich i want to connect 2 WAN. Internally I want to also have 2 internal networks, one on lan port 1 and 1 on lan port 2.
lan port 1 should get its network connection from WAN 1 and lan port 2 should get its network connection from lan port 2.
Is it possible to do that with this router and if so, how can i achieve this
1 Accepted Solution
Re:WAN Configuration
Hi @Daniel0906
Thanks for posting in our business forum.
The above reply from me should be what you configured.
VLAN interface is what you configure for different subnets. Setting up the VLAN to the port, you should tag them correctly.
After you have the VLAN interfaces, you can create the Policy Routing. In the Source, you should set the VLAN interface(subnets) you created.
Both guides should suffice.
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.