Home

Forums

Stories

Knowledge Base

Business Community > Routers > Echange ER605V2 with a ER707-M2 / How to transfer the configuration . I'm also using a OC300

< Routers

Echange ER605V2 with a ER707-M2 / How to transfer the configuration . I'm also using a OC300

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Echange ER605V2 with a ER707-M2 / How to transfer the configuration . I'm also using a OC300

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

BennyCS

2023-10-06 16:10:56

Posts: 15

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2023-04-22

Echange ER605V2 with a ER707-M2 / How to transfer the configuration . I'm also using a OC300

2023-10-06 16:10:56

Tags: #WAN Setup #VPN #ACL #DHCP Service

Model: ER707-M2

Hardware Version:

Firmware Version:

Due to the fact that the open VPN connection on a ER605 is only 15Mb (download) I bought an ER707-M2. Included my Dev list from the OC300. Actual I'm very impressed with the network and access to my NAS and using all kind of device. Impressive Took me some time to configure but everything works perfect. How can I get my ER707_M2 easiest way configured and remove the ER605-V2 5 (or keep in the network as backup)?

MODEL	VERSION
EAP650-Outdoor(EU) v1.0	1.0.0
EAP650-Outdoor(EU) v1.0	1.0.0
EAP650-Outdoor(EU) v1.0	1.0.0
ER605 v2.0	2.1.2
TL-SX3008F v1.0	1.0.0
TL-SX3008F v1.0	1.0.0
TL-SG3210XHP-M2 v2.0	2.0.6

6 Reply

MR.S

LV5

2023-10-06 16:58:51

Posts: 2239

Helpful: 804

Solutions: 286

Stories: 0

Registered: 2018-08-17

Re:Echange ER605V2 with a ER707-M2 / How to transfer the configuration . I'm also using a OC300

2023-10-06 16:58:51

@BennyCS

This is pretty simpler. first off all take backup of your controller :-)

Then remove your old router, go to router and configuration, manage device then forget.

then disconnetct the router from network.

to add you new router goto wired networks, internett. add your new ER707-M2 and follow the interface wizard.

MR.S

LV5

2023-10-06 17:02:10

Posts: 2239

Helpful: 804

Solutions: 286

Stories: 0

Registered: 2018-08-17

Re:Echange ER605V2 with a ER707-M2 / How to transfer the configuration . I'm also using a OC300

2023-10-06 17:02:10

@BennyCS

I also recomand you to configure ER707 with same LAN ip as your network before adopting router.

BennyCS

LV1

2023-10-06 17:03:38

Posts: 15

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2023-04-22

Re:Echange ER605V2 with a ER707-M2 / How to transfer the configuration . I'm also using a OC300

2023-10-06 17:03:38

Thanks will try later this week.

BennyCS

LV1

2023-10-11 12:34:59

Posts: 15

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2023-04-22

Re:Echange ER605V2 with a ER707-M2 / How to transfer the configuration . I'm also using a OC300

2023-10-11 12:34:59

@frantvesson101

The HW-upgrade to the new ER707 from ER605 HW.

Needs to be checked: There is a problem with the download file/site .In the upgrade the reference is Firmware version V1.1.0 but actual it is the Firmware V1.0.2 which is in the link.

Migration done as proposed / defined => during the migration a small configuration application popped up to copy the configurations. so far so good. First Gloance everything is configured included Open VPN.

Initial test -> faster internet and reacting times of the systems.

System / Modem is requesting an update of it's firmware. Not available on the site.

Still a few things not clear on the configuration, but I will first do the Firmware upgrade and then see what the result is.

Keep you posted.

Eg. IP4 Address vs IP6 address, DNS server assignment with IP problems, Assignment of IP address seems to give some issues. Omada Cloud connection to OC300 controller. Assignment of the Wan port. Port 443 forwarding Own configuration issues with the TCP/IP 443 port I used)

Kind regards,

Benny

KimcheeGUN

LV4

2023-10-11 12:54:45

Posts: 607

Helpful: 284

Solutions: 42

Stories: 0

Registered: 2022-07-05

Re:Echange ER605V2 with a ER707-M2 / How to transfer the configuration . I'm also using a OC300

2023-10-11 12:54:45

@BennyCS

Kind of out of left field... Buying the lowest end router in the omada line and being shocked on the low VPN speeds is a no-brainer.

More horsepower = More VPN Speeds.

Just for future reference.

I can not teach anyone anything - I can only make them think - Socrates

BennyCS

LV1

2023-10-11 18:19:14

Posts: 15

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2023-04-22

Re:Echange ER605V2 with a ER707-M2 / How to transfer the configuration . I'm also using a OC300

2023-10-11 18:19:14

@BennyCS

Little disappointed. I had to go back to old configuration and re-use the ER605V2. back to slow but happy days.

Could not get the network working properly and stable with ER707-M2. The Router refused to work on 2,5Gb WAN1, Worked partly on 2,5 Wan/Lan2 but instable, problems with IP/DNS and gateway....

Tried to upgrade to V1.1.0 but the firmware is not available on the download network. Omade System says upgrade to V1.1.0 but the version available is V1.0.2 but not the correct bin File. So I have to investigate more time and also give TP some time to clean up the Download centre.

This Exchange Looks like a simple action but seems not to be. Omade SW Compatibility and Firmware has still some time to go.

Dear Kimchegun,

If you have time maybe look into the frimware files and clean up -> it is not ok. this is version 1.0.2 and the BIN file is corrupt.

Benny

Echange ER605V2 with a ER707-M2 / How to transfer the configuration . I'm also using a OC300

Echange ER605V2 with a ER707-M2 / How to transfer the configuration . I'm also using a OC300

Information

Voters 0

Tags