Issue with AddiHardwareVer when installing OpenWRT 22 Snapshot on EAP225 Outdoor V3
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I am trying to build & install OpenWRT 22 Snapshot on EAP225 Outdoor V3.
I was able to build & install it in some previous EAP225 Outdoor V3 but later brought units i was not able to install.
Steps to Reproduce:
1. CMD: cliclientd stopcs
Given through ssh cli.
And AP responded with Success
2. In TPLink Webbrowser Page, in System Tab, Firmware upgrade tab. Tried to upload/flash build openWRT image.
Below are the logs taken through UART.
NM_Debug](nm_region_getRegionName) 00192: Flash region info, code: 841, name: US.
[ 167.130000] query url: tplinkeapnet
[ 167.140000] query url: tplinkeapnet
[utilities_debug: postFirmwareRpm:179]post request
memFree = 64958464
[utilities_debug: getFirmwareRpm:145]get request
[NM_Debug](nm_fwup_buildUpgradeStruct) 02194: nFileBytes = 8321425
[NM_Debug](nm_lib_getProductInfoFromNvram) 00928: productinfo from NVRAM is (EAP225-Outdoor(TP-Link|UN|AC1200-D):3.0
key=BgIAAAAkAABSU0ExAAQAAAEAAQDZtUNzD6KsxO4Tfx/Sp8S7w8TwPWwoppXy77wSPNs5WoV+Wr4kh09nu70vHVmSPji5KFUG+hmRjapsJsIJj+M0Zmd4EycKY8r0Ea3D4XO/uvloX4VHVPsDZkm8Krian5iNy6BgApVlebx0zQxto0GkgvPBq1nhoZxJNapLghGO7w==
rsaKey=BgIAAACkAABSU0ExAAQAAAEAAQDZaGCNzHjzrgNoCjyHKa0TIkgmqE5kheNhZHs23TmAbHXN0dFwdNOqqDOTmTdoN1+zW6KY3YkkwNypoZbDTR3sKdSdIDTNnftfHhRAlR9l4lNnnvfbUWRDqaGD2nAkdasXXfD5c23COMvAEjLJXzwqZjNmj27ZgrrTlH9SoDPe=
HWID=96455746BD4C5113D5E35DAF2CC3CA9B
)
[NM_Debug](nm_region_getRegionName) 00192: Flash region info, code: 841, name: US.
[NM_Debug](checkSupportList) 01099: Check support-list:SupportList:
[NM_Debug](checkSupportList) 01099: Check support-list:EAP225(TP-Link|UN|AC1350-D):3.0
[NM_Debug](checkSupportList) 01099: Check support-list:EAP225(TP-Link|UN|AC1350-D):3.20
[NM_Debug](checkSupportList) 01099: Check support-list:EAP225(TP-Link|UN|AC1350-D):4.0
[NM_Debug](_checkSpecSuppList) 01031: check spec region support-list: EAP225(TP-Link|CA|AC1350-D):4.0
[NM_Debug](checkSupportList) 01099: Check support-list:EAP225-Outdoor(TP-Link|UN|AC1200-D):1.0
[NM_Debug](checkSupportList) 01099: Check support-list:EAP225-Outdoor(TP-Link|UN|AC1200-D):3.0
[NM_Debug](checkSupportList) 01102: Firmwave supports EAP225-Outdoor(TP-Link|UN|AC1200-D):3.0, check OK..
[NM_Debug](nm_fwup_verifyFwupFile) 02429: curSoftVer:5.1.0 Build 20220926 Rel. 62456,newSoftVer:0.0.0 Build 20230704 Rel. 23498
AddiHardwareVer check: NEW(0x1) >= CUR(0x2), Failed, Refuse upgrade!
[Error][checkFirmware] 278: nm_api_verifyFwupFile failed, errCode 50008
[NM_Debug](nm_region_getRegionName) 00192: Flash region info, code: 841, name: US.
It is highly appreciated if anyone could help on this.
Thanks in Advance.
Regards,
Srisurya.
Something is wrong with the build info, it's dumping because it looks like it is trying to prevent you from downgrading
Find a way to override the AddiHardwareVer check in the update script, or find a way to make your new code something other than Ver:0.0.0