Home

Forums

Stories

Knowledge Base

Business Community > Pharos Wireless Bridges > CPE210 connection dropping to 1 Mbps (AP Client Mode)

< Pharos Wireless Bridges

CPE210 connection dropping to 1 Mbps (AP Client Mode)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE210 connection dropping to 1 Mbps (AP Client Mode)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RCSantos

2022-11-05 12:08:33 - last edited 2023-01-13 20:23:00

Posts: 2

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2022-11-05

CPE210 connection dropping to 1 Mbps (AP Client Mode)

2022-11-05 12:08:33 - last edited 2023-01-13 20:23:00

Tags: #Repeater/Bridge Mode #Pharos Control #Outdoor Wi-Fi Solution

Model: CPE210

Hardware Version: V3

Firmware Version: 2.2.2 Build 20200612 Rel. 38101 (4555)

Hi everyone.

I'm having a issue with my TP-Link CPE210.

The device is in AP Client Router Mode, and it is connected to a Public AP 2.2km away from my home.

When I 1st connected to the AP all seemed fine, until a few hours had passed and the connection suddenly drops to 1mbps speed, and it stays there for like 1h or more sometimes, and it's always dropping the connection to the AP like every 60 or 120 seconds.

At that rate of speed and can't really surf the internet, sometimes it can't even open the Google search page.

I don't know if I have some config wrong or what, i've been playing with several options but with no success.

Also the CPE is connected to a Archer C6

I would really appreciate it if someone could help me with this issue.

Cheers.

2 Reply

Virgo

LV5

2022-11-07 13:13:19

Posts: 2588

Helpful: 349

Solutions: 191

Stories: 0

Registered: 2021-05-10

Re:CPE210 connection dropping to 1 Mbps (AP Client Mode)

2022-11-07 13:13:19

@RCSantos

Wireless communication is mutual and it is recommended that you first confirm that the AP signal at the other end is capable of transmitting steadily over such a long distance.
It seems that there is nothing wrong with the settings, distance settings are recommended to be set to 1.1 times the actual distance.

You can connect a PC behind the CPE and do a continuous ping test to see.

Just striving to develop myself while helping others.

RCSantos

LV1

2022-11-07 19:57:27 - last edited 2022-11-07 19:57:37

Posts: 2

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2022-11-05

Re:CPE210 connection dropping to 1 Mbps (AP Client Mode)

2022-11-07 19:57:27 - last edited 2022-11-07 19:57:37

@Virgo

Thank you for your answer.

I'm gonna do what you said.

Thank you so much.

CPE210 connection dropping to 1 Mbps (AP Client Mode)

CPE210 connection dropping to 1 Mbps (AP Client Mode)

Information

Voters 0

Tags