Mesh clarification
I curruntly have a EAP225 outdoor configured as a standalone AP (no controller). I need to increase it's range so I am planning on purchasing another eap225 outdoor to mesh them. I will also add a controller as I understand it is recommended or required to mesh them. My questions:
1. Do I need an Omada router or switch as well?
2. If I use an network cable to adopt and configure the second AP, can I then remove the LAN cable and just use the PoE side to power the unit? In other words, once configured, is a LAN cable still required?
Thanks in advance
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hey and welcome!
1. Do I need an Omada router or switch as well?
No you do not, the mesh only requires APs and a controller...
2. If I use an network cable to adopt and configure the second AP, can I then remove the LAN cable and just use the PoE side to power the unit? In other words, once configured, is a LAN cable still required?
You dont even need to have a LAN cable to adopt / setup the AP. If you enable MESH on the controller then just power up the second AP it will be detected by the router within a few minuites and you can then adopt it via the MESH (wireless)
Hope that helps!! :)
- Copy Link
- Report Inappropriate Content
Hey and welcome!
1. Do I need an Omada router or switch as well?
No you do not, the mesh only requires APs and a controller...
2. If I use an network cable to adopt and configure the second AP, can I then remove the LAN cable and just use the PoE side to power the unit? In other words, once configured, is a LAN cable still required?
You dont even need to have a LAN cable to adopt / setup the AP. If you enable MESH on the controller then just power up the second AP it will be detected by the router within a few minuites and you can then adopt it via the MESH (wireless)
Hope that helps!! :)
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
EDIT
- Copy Link
- Report Inappropriate Content
You dont need to reset it as it will be "reset" when the AP is adopted by the controller
As long as you have the controller setup for WiFi / Password / Security etc then when the AP is adopted all should be good.
- Copy Link
- Report Inappropriate Content
btx wrote
@scomp you can backup your current standalone settings, but you will have to project your current settings and reconfigure them in omada, there is no way to import them.
But before you extend your network with further eap225-outdoors, make sure that there is no radar detection on your location, otherwise those outdoor devices might be useless if you connect them in mesh. If you have issues with radar detection, better buy other hardware as nobody knows when and if tp-link will fix those issue.
EDIT: If you live in a country with restrictions for DFS channels, you can resolve your issues by not abiding to local laws and to use inappropriately your hardware by choosing another country, guess that is the only workaround which tp-link currently offers to their customers but warns them in their manuals that country has to be set properly as first.
Interesting. Can you give me a few examples of why there might be radar detection on the property? I can't image a scenario requiring that. Thanks
- Copy Link
- Report Inappropriate Content
@Philbert
Thank you
- Copy Link
- Report Inappropriate Content
Philbert wrote
2. If I use an network cable to adopt and configure the second AP, can I then remove the LAN cable and just use the PoE side to power the unit? In other words, once configured, is a LAN cable still required?
You dont even need to have a LAN cable to adopt / setup the AP. If you enable MESH on the controller then just power up the second AP it will be detected by the router within a few minuites and you can then adopt it via the MESH (wireless)
Hope that helps!! :)
So I can use only the PoE side to power the unit and leave the LAN side unplugged?
- Copy Link
- Report Inappropriate Content
EDIT
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 893
Replies: 8
Voters 0
No one has voted for it yet.