Smart Home Community > Kasa Smart Switches > Wiring configuration KS230
< Kasa Smart Switches

Wiring configuration KS230

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wiring configuration KS230

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wiring configuration KS230
Wiring configuration KS230
2023-05-20 05:09:39
Tags: #Dimmer #wiring
Model: KS230 KIT  
Hardware Version: V1
Firmware Version:

I'm having trouble getting my 3way dimmable light to work. Attached is a drawing i put together of how it is currently configured compared to the manufacturer's drawing. What am i doing wrong here? I can get both switches to have a white ring and the main switch's white ring will turn on and off when i press it but the satellite switch won't do anything when i press it. Also, i do not detect any voltage at the Satellite switch but the light is still illuminated. 

 

c082fecf6e9b4b4898f22e276249df99

  0      
 
  0      
 
#1
Options
3 Reply
Re:Wiring configuration KS230
2023-05-22 17:53:22

  @AmateurElectro,

First off, if the light is still illuminated, but no voltage is detected - make sure that you have double and triple-checked how your circuits are wired. It could be that there is another switch in the mix or that the light is actually "between" the switches and is not the standard method of wiring a three-way switch.

 

Normally, when there are behaviors such as this, it is a result of the traveler wires not lining up between the satellite and main units.

 

Does the light dim when using the main switch or is the light receiving constant power?

Check out the Latest: Getting Started with EasyMesh and TP-Link New Tablet Mode for the Tapo App Comparing the Latest Tapo Doorbells
  0  
  0  
#2
Options
Re:Wiring configuration KS230
2023-05-28 17:19:23

  @Riley_S The light is not illuminated. It does not work at all with either of the switches.

 

I had one set of dimmable 3 ways in (KS320) and the switches wouldn't even light up, then i replaced them with another set from another room and the white circles lit up. I changed no wiring configuration for this, just a swap. But it still does not provide power to the light.

  0  
  0  
#3
Options
Re:Wiring configuration KS230
2023-05-28 17:19:58

  @AmateurElectro KS230*

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 600

Replies: 3

Tags

Dimmer
wiring
Related Articles
 KS230 Kit with 2 4-way switches configuration
1114 0
 KS230 Kit v2 wiring variation
90 0
 HS230 in 4-way Configuration
8485 1
 Ks230 malfunction
410 0
 HS200 wiring question- odd receptor configuration
973 0
 KS230 installation help
396 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.