Home

Forums

Stories

Knowledge Base

Home Network Community > SOHO Switches

< Home Network Community

SOHO Switches

The SOHO Switches can be used to extend your small SOHO network. In this section you can say hello to other members, ask, answer or discuss technical topics regarding SOHO Switch.

SOHO Switches

VLAN dropping internet connection

I have had issues with a vlan setup after adding a 3rd switch. I have a TL-SG1024DE switch that has vlans attached to it. Port 1 is connected to wifi router and untagged in all of the VLANs. Ports 2 a

By MaarkF

0Helpful

31Views

0Replies

TL-SG108E does not respond to ping on http://192.168.0.1/

Please help: I just tried to enter the device config and it does not work. I reset the device by pressing the back button and same thing. TL-SG108E came with a simple manual it says that config is at

By WhatsAppJack · Latest post 2025-03-06 16:38:05 by terziyski

0Helpful

106Views

1Replies

1 WAN into 2 LANs using AX6000

I have 2 AX6000 routers that I want to use as 2 separate LANs sharing a single WAN connection. Connecting one to the other is not possible cable-wise, so they need to be in a Y configuration from the

By rcmerlin · Latest post 2025-03-06 16:33:26 by terziyski

0Helpful

89Views

1Replies

MTU VLAN Setting

I am getting ready to alter my current setup as follows: I have a home router that I will connect to a TL-SG105E switch on port 1. I will set up MTU VLANS using port 1 as the up-link port. As I unders

By Joeb1 · Latest post 2025-02-18 22:53:56 by terziyski

0Helpful

298Views

1Replies

Switch says "Link Down" but it's actually working fine

My switch is a TL-SG108E, which isn't listed here but also wasn't listed in the business section -- am I in the wrong forum? I noticed today that one of the green activity lights on my TL-SG108E switc

By PMcJ · Latest post 2025-02-18 22:42:47 by terziyski

0Helpful

214Views

1Replies

Need help picking a TP-Link SOHO switch

Good day, I just bought a TP-Link TL-SG108 SOHO switch. I'm not sure how "smart" this switch is or if there may be a better solution for what I'm trying to do. All of the devices that are connected to

By TimK12 · Latest post 2024-12-17 22:30:15 by Carl

0Helpful

340Views

3Replies

Easy Smart Configuration Utility Discovery Fails Windows 11

I have (2) TP-Link switches in a flat network: A TL-SG108E and a TL-SG1016DE. When I run the Easy Smart Configuration Utility (v1.3.19.0) on my Windows 11 laptop, it cannot discover my two switches, h

By Zeldar

0Helpful

376Views

0Replies

Help setting-up Trunking (LAG) on TL-SG1016DE Rev2

I have new 2Gbps Optical Fiber Internet service. I would like to port 2 of the router ports over to my TP-Link TL-SG1016DE ver 2 switch. It appears "Trunking" and "LAG" are interchangeable terms. My s

By EnGarde · Latest post 2024-11-19 20:31:19 by terziyski

0Helpful

328Views

1Replies

GUI not accessible unless rebooting or pinging

I have an SG1024DE with an odd problem. All firmware is up to date. The switch has a static IP of 192.168.1.68/28 and the DHCP server/router has a reservation set for the MAC address as well. Router O

GUI login

By Layer8Issue

0Helpful

266Views

0Replies

Switch not seen on network after hard reset or power outtage

The Switch appears to default to 192.168.0.1 if it cannot obtain an address from the DHCP server AKA your router if it is set to be such within your routers settings. Depending on your network subnet

Switch Not Connecting

By drewpeanuts · Latest post 2024-09-17 14:42:31 by Ryan

0Helpful

367Views

1Replies