Kasa Smart Plugs
I have four of these units, one of them has started clicking its internal relay rapidly at two to three times per second. With the relay cycling this quickly my test light looks like a strobe. It does
Smart ActionsSetup and ConfigurationClicking
0Helpful
101Views
I have several models of TP-Link Smart Plugs. Currently using EP10 and HS103. Previously I've set these up in a group of two Smart Plugs to turn TV on and a Remote Surround Sound speaker with connecte
Smart ActionsAmazon Alexa
By
MustBGremlins
· Latest post 2024-08-13 17:54:07
by MustBGremlins
0Helpful
177Views
Hi all, I've observed a recent malfunction in a setup that has otherwise worked for more than a year. I've tried a few troubleshooting steps to no avail. I'm hoping to get some help to fix this, or a
Smart Actions
By
Ruskibloo
0Helpful
84Views
Is a Kasa energy monitor smart plug (KP125 or similar) able to perform an action based on its real-time energy draw? Specifically, is it able to perform this smart action: if the real-time energy draw
Smart ActionsEnergy Monitoring
By
kasmhe
0Helpful
108Views
When the power goes out on a ES10, what state does the plug revert to? ON or OFF, or last setting? Does the firmware/app support an optional setting to set whether it is ON or OFF or last setting afte
Feature RequestSetup and ConfigurationSmart Actions
By
szchren
1Helpful
148Views
Hi all I have 2 KP125M plugs and the kasa app. I was hoping to run a schedule when I am away from my house. for example turn a plug on at 11:30pm 'only' when I am not home. I can get the smart action
Smart ActionsScheduleFeature Request
By
Number1Ears
0Helpful
198Views
I just tried adding a plug to a room, it shows in the Room's listing, but it will not operate the new plug. I tried to delete the room, thought I did, but it is still there. how do I permanently delet
Smart Actions
0Helpful
561Views
I have not purchased yet and dont access actions in the app without device setup. Can I setup an automation trigger for when a smart plug senses current draw? For example, if EP25 detects more than 1a
Smart ActionsEnergy Monitoring
By
JimSmith112
· Latest post 2024-01-06 14:17:10
by Mwepel
2Helpful
304Views
Model is EP25 not EP25P4 Today, I update the firmware (1.0.13) on my 12 EP25 Smart Plugs. This update cause all the "Schedule" times to be deleted. When I went to add the events back, an 'error messag
Smart ActionsScheduleSetup and Configuration
By
John-FSU
0Helpful
371Views
Can TP link update the firmware for the aforementioned Kasa Matter plug to address time interval for lights on/off in AWAY mode. Currently the off/ on interval appears to be almost 4 hours in AWAY mod
Smart Actions
By
Withered1
0Helpful
279Views