@computergamer55 Since you can't select only 80Mhz channel width, keep your current setting of "20MHZ / 40MHZ / 80MHZ". It should be an equivalent of the Auto setting in other FW releases. Here's a...

@jwagman1 Chek this FAQ for details on that matter.

@komp66 TL-SG608 is plug and play swicth - that means it's a unmanaged switch and it doesn't need any configuration to work properly. Plug your PC in another switch port. If PC still works fine then...

@Rain123456 Here you go:

@woodgeorgel Onemesh/Easymesh (AX3000) and Deco mesh (X20) are not compatible with each other.- details. One possible scenario would be to use the AX3000 as a standalone router and the X20 in AP mode...

@darnoc23 TL-SG108-M2 is an unmanaged switch - it's a plug and play - there's no settings there. You can check the negotiated speed between your BE9300 and the swicth from the router's WebGUI here:...